Description
PLA filament for prints that break less easily
SUNLU PLA+ is a PLA filament with an improved formula: the manufacturer has modified the PLA recipe so that printed parts break less often. Notched Izod impact strength is 10 ± 3 kJ/m² and tensile strength 46 ± 5 MPa.

Flows evenly through the nozzle
The diameter is accurate to within ±0.02 mm, and good flow keeps the risk of nozzle clogs low.

Knot-free winding
Tightly and neatly wound on the spool, the filament does not knot or tangle during printing. The detachable spool can be reused.

Print settings
At 50–100 mm/s the recommended nozzle temperature is 205–215 °C, and at 100–200 mm/s 215–245 °C. The bed temperature is 50–60 °C; the manufacturer recommends a textured PEI (polyetherimide-coated) build plate that needs no treatment. The cooling fan stays on during printing, retraction distance is 0.8–1.2 mm at 30–40 mm/s, and PVA can be used as support material.

Storage
Keep the filament in a cool, dry, well-ventilated place, protected from sunlight, open flames and heat sources.






Reviews
There are no reviews yet.