Description
PoE video doorbell with two-way audio for the front door of a house
The single-button PoE video doorbell Dahua VTO2 series VTO2101E-P-S2 is an IP door station with a 1/2.8″ 2 MP CMOS camera. Over the local network and the internet the call also reaches the DMSS mobile app.
Camera and night mode
The field of view is 80° horizontal, 40° vertical and 90° diagonal. Wide dynamic range (WDR 120 dB) balances bright and dark areas of the image when the visitor stands against the light. A light sensor detects dusk, the IR illuminator gives the camera extra light in the dark and the ICR filter switches between day and night mode automatically.
Two-way audio, video messages and door release
For two-way audio the panel has a microphone and a built-in speaker, with digital echo suppression and noise reduction. When the indoor monitor (VTH) has an SD card, the visitor can leave a video message. For opening the door the panel has one lock control output and an exit button input.
Connections and installation
On the back there is an RJ-45 network port (10/100 Mbit/s), an RS-485 interface, an alarm input and NO, NC and COM door lock terminals. The panel is surface mounted on the wall at a height of up to 2 m, and the cables leave through the cable outlet in the rear panel. Setup is done in the web interface, where the administrator password is set at first power-on. For interoperability the panel supports the SIP protocol (the IP calling standard) and ONVIF.
In the box
- Video doorbell Dahua VTO2101E-P-S2
- Power and alarm ribbon cable
- Rain cover





Reviews
There are no reviews yet.