Description
Video doorbell for a house entrance with calling and door opening
The Dahua VTO2202F-P-S3 video doorbell is an IP video intercom door station that connects to indoor monitors over a digital 2-wire line. During a call you can talk to the visitor and open the door remotely, also from the phone app.
Intercom with a 2 MP wide-angle camera
The 1/2.9-inch 2 MP CMOS sensor covers 168.6° horizontally and 176.7° diagonally. 120 dB WDR (wide dynamic range) shows both bright and shaded areas in backlight, and IR illumination switches on in the dark. Calls have echo suppression and digital noise reduction.
Connections for a lock, door sensor and exit button
The station has a lock control output, inputs for an exit button and a door status sensor, an alarm output, an RS-485 interface and a 12 V, 600 mA power output. It connects to the network through an RJ-45 port (10/100 Mbit/s) and supports ONVIF and SIP. If the station is removed from the wall, the tamper sensor beeps and creates an alarm record.
Power from a 2-wire switch or PoE
The station takes power from a Dahua 2-wire switch up to 50 m away, from a 48 V DC power supply (1 A) or over PoE (802.3af/at). When a load is powered from the 12 V output, connect the station to a PoE switch compliant with 802.3at.
Flush or surface mounting
The aluminium housing is rated IK07 and IP65 and works at –30 °C to +60 °C. The station mounts flush or on the wall surface: the VTM114 box fits flush mounting, the VTM115 box and the VTM05R rain cover surface mounting. Seal the housing with silicone to achieve IP65 protection.
Setup in the web interface
On first start you open the station’s default address 192.168.1.108 in a browser and set the password you then log in with as admin. In the web interface you set call numbers, the lock opening time and the SIP server. Video messages are stored on a microSD card of up to 256 GB.


Reviews
There are no reviews yet.