Description
PoE video doorbell with card reader and lock control
The PoE video doorbell Dahua VTO2111D-P-S3 is a villa door station with a 2 MP camera, one mechanical call button and an IC card reader. You talk to the visitor with two-way audio, and the panel suppresses echo and background noise digitally. The camera’s 1/2.8-inch sensor gives a 107° horizontal and 122° diagonal field of view, and automatic IR illumination switches on in the dark.
Opening the door by card, app or indoor monitor
The panel stores up to 10,000 IC cards, reads them from up to 4.5 cm, and new cards can be issued at the panel. The lock port is normally closed by default, and the panel also has an exit button input, a door status input and a 12 V, 200 mA power output.
Video intercom connection and power
The panel runs on standard PoE, which means power and data come over the same network cable; alternatively it is powered with 12 V, 1 A DC. The network port is 10/100 Mbit/s, and the panel has a web interface for configuration. Visitors can leave a video message, which is stored on the indoor monitor’s SD card.
Mounting on an outside wall
The panel is made for surface mounting outdoors: the bracket is screwed to the wall with four screws and the panel is fixed to it with a screw from below. IP65 protection (dust-tight and protected against water jets) requires silicone sealant during installation, and the housing has an IK04 impact rating. The panel works at –30 to +60 °C and is installed at a height of up to 2 m.
In the box
- Video doorbell Dahua VTO2111D-P-S3, 1 pc
- mounting brackets
- rain cover
- alarm and power ribbon cable




Reviews
There are no reviews yet.