Description
The Sonoff ZBM5-1C-86W Zigbee touch wall switch simplifies lighting control in both a new and an old installation
If your lighting needs a smart upgrade, but there is little room in the fuse board or the switch location has no neutral wire, the Sonoff ZBM5-1C-86W Zigbee touch wall switch offers a practical solution. The switch works both without a neutral wire and in installations with a neutral wire, is compatible with a Zigbee gateway and allows convenient remote control in the eWeLink app and with voice commands. The detach relay function keeps smart bulbs connected to the network and your lighting is always ready for automation and scenes.
Main features
- Works in an installation with and without a neutral, a minimum load of 3 W without a neutral for stable operation
- Remote and voice control in the eWeLink app and with Alexa and Google Home through the SONOFF Zigbee gateway
- Detach relay keeps smart bulbs powered even when the wall switch is switched off
- A standard Zigbee 3.0 connection and support for the Zigbee2MQTT and ZHA platforms
- A maximum resistive load of 10 A at 100-240 V~ and an LED load of up to 400 W @240 V
- Schedules and smart scenes simplify everyday routines and energy saving
- A compact size of 87 × 87 × 40.2 mm and a clear touch plate for convenient use
Compatible with your home
The Sonoff ZBM5 suits most home installations. This switch works both in solutions without a neutral wire, which are common in older buildings, and in installations with a neutral wire in newer or renovated homes. This way you can start using the automation options regardless of how old your electrical installation is.
Control within your reach
You control the lighting with the eWeLink app on iOS and Android devices. You see the state of the switch, switch the lights on or off remotely and set up operation according to your needs. Please note that to use the remote control options a compatible SONOFF Zigbee gateway is required, for example iHost, NSPanel Pro, ZBBridge-U, ZBBridge-P or ZBDongle-E/-P.
For your convenience
Set fixed times so that the lights switch themselves off for the night and support a healthy daily rhythm. Voice control with Alexa and Google Home helps at moments when your hands are busy. With the help of Zigbee2MQTT and ZHA support, the Sonoff ZBM5 integrates easily with open platforms, to bring devices of different manufacturers together into a working smart home.
Automation and smart scenes
Create scenes according to your habits. The Zigbee protocol allows, for example, two-way control of bedroom lighting with the help of a wireless Zigbee button or automatic switching of the lights according to a sensor signal. The detach relay function ensures that smart bulbs do not lose power even when the wall switch is switched off.
In the set
The set contains a touch switch, two fixing screws and a user guide.
Compatibility, necessary additions and care
The switch suits use in installations both with a neutral wire and without a neutral. With a connection without a neutral, a load of at least 3 W is required, for operation to be stable. The product suits ordinary LED loads within the specified limits, and when used with smart bulbs the detach relay helps prevent them from disappearing from the network connection when the wall switch is switched off.
For remote control and voice commands a compatible SONOFF Zigbee gateway is required, which is not included in the set. The device works on a Zigbee 3.0 network and also supports the Zigbee2MQTT and ZHA platforms, which facilitate integration into open-source smart homes. Please check the load limits and choose the necessary infrastructure according to your environment.
For care, clean the switch with a dry or slightly dampened soft cloth and avoid abrasive cleaning agents. Keep the device dry and make sure that ventilation is sufficient. If necessary, check the firmware updates available in the app and have the electrical connections carried out by a competent specialist.
Installation and getting started
Before starting work, switch the power off and make sure there is no voltage. Connect the wires according to the enclosed diagram and fix the switch in the socket box. If your installation has a neutral wire, use the N terminal. In an installation without a neutral, make sure the load is at least 3 W. After the mechanical installation, add the switch to the Zigbee network according to the manufacturer’s guide, then link it with the eWeLink app and, if necessary, a voice assistant. Set up schedules, scenes and the detach relay function if you use smart bulbs. If an error appears, check the wiring, the load limits and the gateway’s network connection.
In the set
- Touch wall switch
- Fixing screws x2
- User guide
Make lighting smartly controllable
The Sonoff ZBM5-1C-86W helps bring flexibility and clarity to everyday lighting. Operation with or without a neutral wire, a Zigbee 3.0 connection and eWeLink schedules and scenes create a firm basis for a future-proof solution. If you need a reliable switch with remote control and voice control options, this model is a practical choice that helps save time and raise ease of use.




Reviews
There are no reviews yet.