Description
The Sonoff ZBM5-3C-80W Zigbee touch 3-gang wall switch solves the challenge of both an old and a new installation
Make lighting control simple and unified. The Sonoff ZBM5-3C-80W Zigbee 3.0 touch wall switch works in circuits both with a neutral wire and without a neutral wire and controls up to three lighting groups. The switch can be managed from a phone with the eWeLink app, you can create schedules and scenes and use voice through Alexa or Google Home, if the system has a suitable Zigbee gateway.
Main features
- 3 channels in one body: a convenient solution for controlling separate zones or light fittings from one location.
- Works both without a neutral wire and in a circuit with an N wire: suits both older and newer buildings.
- eWeLink support: remote control, schedules and scenes on a smartphone.
- Voice support through Alexa and Google Home with the help of a Zigbee gateway: hands-free control.
- Detach relay: smart bulbs stay on the mains even when the wall switch is switched off.
- Zigbee 3.0 and compatibility with Zigbee2MQTT and ZHA: flexible operation also in open-source platforms.
- A load of up to 10 A for the whole device: helps avoid overload. A minimum load of 3 W for operation without a neutral.
- A compact size of 86 × 71 × 40.3 mm: fits a standard flush-mounting box, and the white finish matches the interior.
Compatible with your home
The device suits the electrical installations of most dwellings. It works both in a circuit without a neutral wire, which is common in older houses, and in systems with a neutral wire, which are found in newer or renovated buildings. This way you can use automation and smart control regardless of how old your electrical installation is.
Control within your reach
Manage the switch in the iOS and Android eWeLink app: see the status, switch lights and adjust settings regardless of location. For remote control and voice operation a SONOFF Zigbee gateway is needed, such as iHost, NSPanel Pro, ZBBridge-U or ZBBridge-P or ZBDongle-E/P. Without a gateway the switch works on the spot as a touch wall switch.
Everyday convenience
Set schedules so that the lights switch on or off at a fixed time, and use voice control through Alexa and Google Home. Thanks to Zigbee2MQTT and ZHA support, the switch can also be interfaced with open platforms, creating a complete smart home where devices of different manufacturers communicate.
Automation and smart scenes
Create scenes according to your routine. For example, the lighting of a bedroom can be controlled from two switching points with the help of a Zigbee wireless button, or the lighting can be started from a motion sensor signal. Detach relay keeps smart bulbs connected to power even when you switch off the wall button, which makes it possible to continue control from the app and according to schedules.
In the set
The set contains a touch switch, 2 fixing screws and a user guide.
Compatibility, loads and system requirements
The switch suits a circuit both with a neutral wire and without a neutral wire. In an installation without a neutral a minimum load of 3 W is required, to ensure stable operation. The total load of the device is 10 A for a resistive load. If you use several channels, take into account the sum of the loads across the whole device.
For LED light fittings the manufacturer’s limits apply. A maximum of up to 400 W at 240 V per channel and up to 400 W at 240 V in total. At 100 V up to 200 W per channel and up to 200 W in total. Avoid exceeding the limit values and always go by the specification of the light fittings used.
Remote control and voice control require a compatible Zigbee gateway. The device uses the Zigbee 3.0 protocol and is also compatible with the Zigbee2MQTT and ZHA platforms, which allows the switch to be integrated into a wider smart home ecosystem.
Installation and usage recommendations
Switch the power off and make sure you connect the wires according to the diagram both in the variant with an N wire and without a neutral. With a connection without a neutral, take into account the minimum load of 3 W. After installation, add the device to your Zigbee gateway: put the switch into pairing mode and finish pairing with eWeLink. Then create schedules, automations and, if necessary, scenes. We recommend having the installation done by a qualified electrician and periodically checking the tightness of the screw fixings and the cleanliness of the device with a dry cloth.
In the set
- Touch wall switch
- Fixing screws x2
- User guide
Ready for smart lighting
If you are looking for a flexible and reliable solution, the Sonoff ZBM5-3C-80W offers smooth 3-gang control with Zigbee 3.0 support in both modern and no-neutral installations. Connect to a Zigbee gateway, create schedules and automations and save time with convenient voice operation. The result is organised and safe lighting control in one device.




Reviews
There are no reviews yet.