Description
Touchless kitchen mixer tap BLANCO CULINA-S II Mini Sensor
The touchless kitchen mixer tap BLANCO CULINA-S II Mini Sensor is a single-lever tap with a pull-out spray whose brass body and metal spray head have a stainless (PVD steel) finish. Water runs from the lever on the right-hand side or touch-free: the sensor on the body switches on hands-free mode for washing up and cleaning, and the sensor on the spray starts fast filling of pans and jugs with cold water. A high-pressure (HD) tap suits a kitchen where both the cold and the hot water pipes come out of the wall; an open, unvented boiler under the sink needs a low-pressure (ND) tap.
Spout, spray and flow rate
The spout reaches 205 mm and the maximum flow rate is 8.3 l/min at 3 bar. The pull-out spray has two spray modes and a magnetic holder keeps the spray in place after use. The spray hose is metal-sheathed and the aerator gives a clear jet. The built-in non-return valve prevents backflow into the water supply to EN 1717.
Installation and water pressure
The tap fits a 35 mm tap hole in the sink or worktop and is fixed from below with the hand-tightened BLANCOLock fixing. BLANCO’s drawing allows a mounting surface up to 51 mm thick. In a stainless steel sink the stabilising plate gives the tap a firmer footing. The tap is rated for water pressure up to 10 bar and water up to 70 °C.
Valve box, hoses and power
The hot and cold water hoses connect with a 19 mm spanner to the electronic valve box in the sink cabinet; the flexible connection hoses are 950 mm long with a ⅜″ nut. The valve box fixes to the cabinet wall with adhesive pads after cleaning the surface with alcohol, or with screws, and the power supply plugs into a 230 V socket. The battery box holds six AA batteries that keep the tap working during a power cut. After connecting, unscrew the spray aerator, run the water for at least 20 seconds and refit the aerator.
Finish and matching sink
The stainless colour is a PVD finish on the brass body. BLANCO states that this finish matches all BLANCO stainless steel sinks, especially when the sink has a satin polish.
Tap care
Dry the tap with a microfibre cloth after use. Remove limescale with a vinegar or citric acid based cleaner and then rinse with clean water. Do not clean the tap with chlorine cleaners or the scouring side of a sponge. If the spray starts to splash, unscrew the aerator anticlockwise and soak it overnight in vinegar water or citric acid solution.
Dirt filter and spare parts
In houses with old pipes BLANCO recommends a dirt filter between the angle valve and the tap hose. BLANCO states that spare parts are available for at least 10 years.
In the box
- Kitchen mixer tap BLANCO CULINA-S II Mini Sensor, 1 pc
- Battery box and batteries
- Flexible connection hoses, 950 mm, with ⅜″ nut
- Stabilising plate for installation in stainless steel sinks




Reviews
There are no reviews yet.