Description
Roller mop robot vacuum and edge cleaning
The roller mop robot vacuum scrubs and rinses the floor in one pass, as the roller washes itself while working. The TruEdge 3.0 roller extends 1.5 cm outwards to clean along edges. The robot detects carpets with an ultrasonic sensor and lifts the roller mop; do not use it on long-pile carpets or carpets with fringes over 10 mm. The ZeroTangle 3.0 spiral side brush and main brush guide hair into the airflow.
OMNI all-in-one station
The station empties the robot’s dust bin into a 3-litre dust bag that lasts up to 90 days according to the manufacturer. It soaks the roller mop in water up to 75 °C and dries it with 63 °C air in about 2 hours; the mop washing tray needs cleaning about once every 150 days. The station refills the robot’s water tank automatically from its 4-litre clean water tank; the dirty water tank holds 2.2 l.
Navigation and obstacles
The laser navigation module maps rooms up to 10 m away, and maps can be saved for several floors. The robot recognises obstacles with AIVI 3D 3.0 structured light, an RGB AI camera and an auxiliary light. It is controlled with the ECOVACS HOME app and connects via Bluetooth and 2.4 GHz Wi-Fi. The battery is 6400 mAh and charging takes about 3.5 hours.
Installation and first use
Place the station on a flat, hard surface against a wall, leaving 0.05 m free at the sides and 0.8 m in front; cover the lowest 14 cm of any mirrors near the station. Keep the station out of direct sunlight. Add one cap, about 20 ml, of cleaning solution to a full 4-litre clean water tank, and never fill it with hot water.
Cleaning and maintenance
Clean the robot’s dirty water tank, drip tray, main brush and filter every week and the side brush every 2 weeks. Rinse the dust bin and filter with water and let them air-dry; never wash the robot or the station with water. Clean the station’s dirty water tank and dust compartment monthly and the clean water tank every 3 months. Replace the roller mop every 1–2 months, the side brush and filter every 3–6 months and the main brush every 6–12 months.
In the box
- DEEBOT T80S OMNI robot
- OMNI all-in-one station
- station base plate
- power cord
- user manual











Reviews
There are no reviews yet.