Description
Robot vacuum with a bagless OmniCyclone station
The Ecovacs DEEBOT X11S OmniCyclone is a roller mop robot vacuum whose 27 cm microfibre roller turns at 200 rpm and is cleaned by 32 nozzles while it works. The BLAST system delivers up to 30,000 Pa of suction and 16 l/s of airflow. The robot can vacuum only, vacuum and mop at the same time, or vacuum first and then mop; the floor is washed with warm water and the water flow is adjustable. When ultrasonic carpet detection finds a carpet, the robot lifts the mop by 15 mm.
OmniCyclone station empties without a dust bag
The station’s 1.6-litre bagless dust container collects dust for up to 48 days; the Quick-clean scraper ring cleans the container wall and the filter mesh at one press. The Fresh-flow high-pressure pump sprays heated clean water onto the roller, two high-speed scrapers remove the dirty water and the washing tray drains quickly. The dirty water tank is cleaned by a propeller turning at up to 5000 rpm. After cleaning, the station switches to the heavy-duty cleaning solution for a deep wash of the roller. The roller is dried with 63 °C air for 2, 3 or 4 hours. The station’s clean water tank holds 3.5 l and the dirty water tank 2.7 l; one tankful washes up to 400 m² of floor, and the station refills the robot’s 110 ml water tank itself.
Edges, thresholds and obstacles
Along edges the TruEdge 3.0 roller extends by 1.5 cm and a soft felt strip protects furniture from scratches. The robot detects tangling at the ZeroTangle 4.0 main brush. TruePass Adaptive four-wheel drive climbs thresholds up to 2.4 cm and double steps up to 4 cm. The robot is 95 mm high, detects obstacles with structured light, an RGB AI camera and supplementary lighting, and navigates with a Mini-ToF sensor.
Battery and charging
The robot has a 4000 mAh lithium-ion battery that takes about 2.5 h to charge fully. PowerBoost fast charging adds 10% of battery in 3 minutes while the mop is being washed, and one task can cover up to 500 m².
Installation
To fit the supplied corner guards, align the inner slot of the guard with the edge and press it into place.
In the box
- DEEBOT X11S OmniCyclone robot vacuum
- OmniCyclone cleaning station with base
- Power cord
- Corner guards, 1 pair
- ECOVACS DEEBOT cleaning solution
- ECOVACS DEEBOT heavy-duty cleaning solution
- Care Kit: side brushes, 2 pcs
- Care Kit: main brush, 1 pc
- Care Kit: filters, 3 pcs
- Instruction manual










Reviews
There are no reviews yet.