Description
TTL flash trigger for controlling five flash groups from a Fujifilm camera
The Godox X2T-F TTL flash trigger fits the hot shoe of a Fujifilm camera and controls X system flashes over 2.4 GHz radio at up to 100 m. Flashes can be fired in TTL, M and Multi mode. The manufacturer has tested it with cameras including the Fujifilm X-T5, X-T4, X-S20, X-H2 and GFX 50S.

Groups and flash settings
The five groups A–E have their own quick-select buttons, and the screen can show three or five groups. In M mode power changes in steps of 0.1 or 0.3, and in TTL mode flash exposure compensation covers ±3 EV in 0.3 EV steps. Zoom (auto or 24–200 mm) and the modelling lamp can also be set from the trigger, and in Multi mode you can choose the flash count and frequency. High-speed sync (HSS) and second-curtain sync are selected in the Fujifilm camera’s flash settings.

Channels and ports
To avoid interference there are 32 channels and 99 IDs, and the channel scan looks for a free channel. The 3.5 mm sync socket works as an input when the X2T-F is fired from another device, or as an output for other triggers and flashes. Firmware is updated through the USB-C port.
Radio trigger with Bluetooth and the Godox Flash app
Over Bluetooth the trigger connects to the iOS and Android app Godox Flash, where flash mode, power, zoom, modelling lamp and beep can be changed. With supported phones such as the iPhone 8 and Samsung Galaxy S9, flashes can also be fired when shooting with the phone. The SHOOT function selects whether the trigger sends only the trigger signal in M and Multi mode, which saves the batteries, or also sends the settings with every shot.

Use
Put the trigger on the hot shoe of the switched-off camera, then switch on the camera and the trigger. Set the same channel and ID on the flash as on the trigger, and choose each group’s mode and power on the trigger. After 60 seconds of inactivity the trigger goes to standby and wakes with a half-press of the shutter button. The focus assist light is switched on with the switch on the side.

Power
It runs on two AA batteries that go into the battery compartment on the back. The battery indicator shows the charge in three steps, and a flashing icon means the voltage is below 2.5 V and the batteries need replacing.
Care
Keep the trigger dry and remove the batteries when it will not be used for a longer time.
In the box
- Flash trigger Godox X2T-F, 1 pc







Reviews
There are no reviews yet.