Description
TTL flash trigger for Olympus and Panasonic cameras
The Godox X3Pro O is a TTL flash trigger for Olympus and Panasonic cameras that slides into the camera hot shoe and wirelessly controls Godox speedlights, outdoor, studio and retro flashes with the 2.4 GHz X system. Settings are changed on the 2.4-inch touchscreen or with the buttons and select dial.

Controlling flashes group by group
Flashes are controlled in TTL, M and Multi modes, and the screen shows four of 16 groups at once. In TTL mode you set flash exposure compensation within ±3 EV in 1/3 EV steps. For each group you choose zoom AUTO or 24–200 mm, the modelling lamp and TCM, which converts the TTL shot value into M-mode power. High-speed sync (HSS) and curtain sync are supported, with second-curtain sync set on the camera. The trigger remembers settings and restores them after a restart.

Radio link and the Godox Flash app
The radio system has 32 channels and 99 IDs, and the channel scan finds eight free channels in 32 seconds. Via Bluetooth the trigger connects to the Godox Flash app for Android and iOS, where you change group settings and power and fire the flashes from your phone.

Shooting modes and shutter control
One-Shoot sends only the trigger signal and saves battery, All-Shoot also sends the parameters, and L-858 lets you set the flashes with the Sekonic L-858 light meter. With the separately sold XR receiver the X3Pro O also controls the camera shutter: single shot, continuous, BULB, delayed shot and a timed shooting schedule.
Battery and charging
The built-in 3.87 V, 2930 mAh lithium battery charges via USB-C in about 2 hours and lasts about 35 days in standby. In the menu you can set auto power-off after 30, 60 or 90 minutes. The USB-C port is also used for firmware updates.

Use
Switch off the camera and the trigger, slide the trigger into the camera hot shoe and switch both on. Set the same channel and ID on the trigger and the flash; pressing the camera shutter then fires the flash.
Cleaning and care
Clean the trigger with a dry soft cloth. Before longer storage charge the battery to about half and repeat this at least every six months.
In the box
- Godox X3Pro O flash trigger, 1 pc
- Storage pouch
- USB-C charging cable
- User manual






Reviews
There are no reviews yet.