Description
TTL flash trigger with touchscreen for the Godox flash system
The TTL flash trigger Godox X3 O mounts on the camera hot shoe and controls flashes with the Godox 2.4 GHz X system from up to 100 m. It supports Olympus and Panasonic TTL auto flash and high-speed sync (HSS) up to 1/8000 s, so you can use flash at shutter speeds shorter than the camera’s normal flash sync speed. Godox has tested compatibility with cameras including the Olympus PEN-F, E-M1, E-M10 II and E-M10 III and the Panasonic DMC-GH4, DMC-G85 and DMC-GX85.

The touchscreen shows the output of several groups at once
You change settings by swiping and tapping the touchscreen, and the trigger also has a select dial and two buttons. The screen shows the output or flash exposure compensation of several groups at once, and you can choose up to 16 groups (A–F and 0–9). Screen brightness can be changed in the settings.

Flash control in TTL, M and Multi mode
Flash exposure compensation can be set within ±3 EV in 1/3 EV steps, and the flash zoom to auto or 24–200 mm. The TCM function converts the TTL value into M mode output. Front-curtain and high-speed sync are set on the trigger, rear-curtain sync in the camera menu. To avoid interference there are 32 channels and wireless ID OFF or 01–99, and the scan function finds a free channel. In Sekonic L-858 mode you set the flash parameters directly on the light meter.

Built-in battery and USB-C charging
The trigger has a built-in 850 mAh lithium battery that charges fully via the USB-C port in about 2 hours and lasts about 7 days on standby. The same port is used for firmware updates. Auto power-off can be set to 30, 60 or 90 minutes.
Use
Switch the camera off, mount the trigger on the hot shoe, then switch on the trigger and the camera. Swipe down from the top of the screen, open Setting and set the channel and ID under Wireless, and set the same channel and group on the flash. To remove the trigger, hold the release button and slide the trigger straight out of the hot shoe.
Cleaning and care
Clean the trigger with a soft dry cloth. Keep it dry and protect it from drops and sudden temperature changes so that no condensation forms inside.
In the box
- Flash trigger Godox X3 O, 1 pc
- USB-C charging cable, 1 pc
- Storage pouch, 1 pc
- Instruction manual, 1 pc







Reviews
There are no reviews yet.