Description
TTL flash trigger for radio control of Godox flashes from a Pentax camera
The Godox X2T-P TTL flash trigger controls Godox X system flashes by radio from up to 100 m. It supports Pentax TTL autoflash and also works with cameras that have a PC sync socket. The maker has tested it with the K-1, 645Z, K-70, K-50, KP, K-S2 and K-3 II.

Flash modes, groups and high-speed sync
Each group can be set to TTL, M or Multi mode: in TTL mode you adjust flash exposure compensation within ±3 EV in third-stop steps, in Multi mode the strobe output, number of flashes and frequency. Flashes are split into five groups A–E, there are 32 radio channels, and a wireless ID from 01–99 helps avoid interference.
High-speed sync (HSS) lets you use flash at short shutter speeds down to 1/8000 s when the camera supports them. Second-curtain sync, flash exposure lock, AF assist light and modelling lamp control are also built in.

Control from a smartphone via Bluetooth
Built-in Bluetooth connects the trigger to the Godox Flash app on iOS and Android, where you can change flash mode and output and switch the modelling lamp and beeper.

Display, power and connections
Settings show on the LCD, and backlit buttons help in the dark. Power comes from two AA batteries. A USB-C port is for firmware updates and a 3.5 mm sync socket for cable sync. After 60 seconds without use the trigger goes to standby; a button press or a half-press of the camera shutter wakes it.

Use with a camera flash
- Switch off the camera, mount the trigger on its hot shoe, then switch on the trigger and the camera.
- Press MENU and set the channel, group, mode and output.
- Set the flash to wireless slave mode with the same channel and group as the trigger.
- Press the shutter button: the status lamps of the trigger and the flash light red.
In the box
- Flash trigger Godox X2T-P, 1 pc







Reviews
There are no reviews yet.