Description
Wireless access point for outdoor use
The outdoor wireless access point Ubiquiti UniFi U7 Outdoor supports Wi-Fi 7, works in the 2.4 and 5 GHz bands and also connects IEEE 802.11a/b/g/n/ac/ax devices. It has four spatial streams and a data rate of up to 4300 Mbit/s. To serve several clients at once the access point uses MU-MIMO.
Housing and antennas
The aluminium and polycarbonate housing is rated IPX6, meaning protection against powerful water jets. Two detachable omnidirectional antennas attach with RP-SMA connectors and have a gain of up to 12.5 dBi. The operating temperature range is −30 to 60 °C.
Network and security
The access point supports WPA3, WPA2 and WPA-Enterprise encryption and PPSK keys, which give different user groups their own passwords on one network. For traffic management it offers VLAN support (IEEE 802.1Q), quality of service (QoS) settings and rate limiting. Setup is done in the UniFi app from the App Store and Google Play.
Connection and power
The access point connects to the network through one 2.5 Gbit/s Ethernet port, which also carries PoE+ power (IEEE 802.3at) at 44–57 V DC. Maximum power consumption is 19 W. A PoE injector is not included.
Installation
For wall mounting, mark the holes with the mounting template and drill them with a 5 mm bit. Route the Ethernet cable through the wall bracket, fix the bracket with two anchors and screws and connect the cable to the connector module removed from the back of the access point. Then slide the access point onto the bracket and lock it with the M2.5 screw. To fit the antennas, remove the caps on the top edge, screw the antennas on and turn them to the required angle.
In the box
- Wireless access point Ubiquiti UniFi U7 Outdoor
- 2 antennas
- wall bracket
- mounting template
- 2 anchors and 2 screws
- M2.5 locking screw
- pole mount plate and 2 metal clamps













Reviews
There are no reviews yet.