Description
Wireless bridge for the 5 GHz band
The NanoBeam 5AC Gen 2 is a 5 GHz wireless bridge operating at 5.15–5.875 GHz with data rates of up to 450 Mbit/s. Maximum link distance is 15 km, with antenna gain of up to 19 dBi. Supported modulations are BPSK, QPSK, 16-QAM, 64-QAM and 256-QAM.
Gigabit Ethernet ports and PoE power
The device has two Gigabit Ethernet RJ45 ports at 10/100/1000 Mbit/s. Power is delivered over the network cable from the included 24 V, 0.5 A PoE adapter; maximum power consumption is 8.5 W. The device has surge protection.
Management and hardware
Configuration is through a web-based management interface, and the radio link is encrypted with WPA2. An Atheros MIPS 74Kc processor at 720 MHz runs the device, with 128 MB DDR2 RAM and 8 MB flash memory.
Wall or pole mounting
The included bracket mounts the bridge on a wall or pole. The plastic housing operates at −40 to 80 °C and 5–95% relative humidity. LED indicators show signal strength, power and LAN status, and a reset button restores factory settings.
In the box
- Ubiquiti NanoBeam 5AC Gen 2 wireless bridge
- PoE adapter 24 V, 0.5 A
- power cord
- wall or pole mounting bracket





Reviews
There are no reviews yet.