Description
Wi-Fi router with RS232 interface and DIN rail mounting
This industrial Ethernet router with RS232 isolates end devices in their own network and connects serial devices through a DB9 connector. The aluminium housing of the Teltonika RUT142 measures 113.1 × 68.6 × 25 mm, weighs 149.2 g and mounts with an integrated DIN rail bracket.
Ports, Wi-Fi and power
The front panel carries one LAN and one WAN port (10/100 Mbit/s), the RS232 interface, a reset button and an RP-SMA connector for the Wi-Fi antenna. Wi-Fi 4 (802.11b/g/n) works as an access point or client and serves up to 50 simultaneous connections. Power is connected through a 3-pin terminal block, and the input has reverse polarity protection. Power consumption is under 1 W at idle and under 2 W under load.
Industrial protocols, VPN and routing
The router talks to industrial equipment over Modbus TCP and RTU, DLMS, DNP3 and OPC UA, and the Modbus MQTT gateway passes commands and data through an MQTT broker. For VPN connections it offers OpenVPN, IPsec, WireGuard, GRE, PPTP, L2TP, DMVPN, SSTP, ZeroTier, Stunnel and Tinc. Routing is static, policy-based or dynamic with BGP, OSPF v2, RIP v1/v2, EIGRP and NHRP.
Use and remote management
The router runs RutOS, based on OpenWrt, and the web interface opens at the default address 192.168.1.1. It can also be managed over SSH, SNMP, JSON-RPC and TR-069. The Teltonika RMS remote management system updates firmware and configuration on several devices at once, and settings are kept during firmware updates. The housing has a grounding screw.
In the box
- router Teltonika RUT142
- 3-pin power connector
- quick start guide








Reviews
There are no reviews yet.