Description
5G outdoor router with dual SIM and PoE power
The Teltonika OTD500 is an IP55-rated router for outdoor use whose 5G modem works on both SA and NSA networks. Download speed on 5G reaches 2.4 Gbit/s (SA) and 3.4 Gbit/s (NSA), upload up to 900 Mbit/s. On 4G the router runs at LTE Cat 19 with up to 1.6 Gbit/s down and 200 Mbit/s up. Supported 5G bands are n1, n3, n5, n7, n8, n20, n28, n38, n40, n41, n71, n75, n76, n77 and n78, and LTE bands B1, B3, B5, B7, B8, B20, B28, B32, B71, B38, B40, B41, B42 and B43.
Two SIM cards and eSIM
The router has two Mini SIM (2FF) slots and eSIM support for up to seven profiles. It switches to the second SIM automatically on weak signal, a data limit, roaming or a lost connection. The standby card only starts using data after the switch.
PoE power and gigabit ports
The router is powered over Ethernet to 802.3af/at at 42.5–57.0 V DC. The second port passes on 802.3af PoE power of up to 15 W. Both 10/100/1000 Mbit/s ports can be set up as WAN, so a wired connection works as an automatic backup link. Power consumption is 2.5 W at idle and 9 W at maximum load.
Management and VPN
The router runs RutOS, configured through the web interface, SSH or Teltonika RMS. VPN options are OpenVPN, IPsec, WireGuard, ZeroTier, Tailscale, L2TP, PPTP, GRE and SSTP. It talks to industrial equipment over Modbus TCP, MQTT, DNP3 and OPC UA.
Installation
The supplied holder fixes the router to a vertical surface or a pole. The SIM slots, Ethernet ports and reset button sit under the end cover. The router operates from −40 °C to 55 °C at 10–90% relative humidity, non-condensing.
In the box
- Teltonika OTD500 router
- Router holder
- Quick start guide











Reviews
There are no reviews yet.