Description
A 5G and 4G router for industrial use on a DIN rail
The 5G and 4G router Teltonika RUTX50 in an aluminium housing shares the internet of a mobile network through five gigabit Ethernet ports and dual-band Wi-Fi 5. The housing has the IP30 protection rating, which means protection against solid particles larger than 2.5 mm, and works at a temperature of −40 °C to 75 °C.
Mobile connectivity in 5G, 4G and 3G networks
The 5G modem works both in an SA network (only with a 5G core network) and in an NSA network (5G relying on a 4G core network) and, according to the manufacturer, reaches up to 3.3 Gbit/s on download and up to 900 Mbit/s on upload. In a 4G network the modem is of the LTE Cat 20 class, up to 2.0 Gbit/s down and 200 Mbit/s up.
Wi-Fi, ports and interfaces
Dual-band Wi-Fi 5 (802.11ac Wave 2, MU-MIMO) gives up to 867 Mbit/s and, according to the manufacturer, accepts up to 150 simultaneous connections. For wired devices there are four LAN ports and one WAN port, which can be configured as a LAN port. To the USB 2.0 port you can connect an external hard drive, a memory stick, an additional modem or a printer. The GNSS receiver determines the location by the GPS, GLONASS, BeiDou and Galileo systems.
Management and VPN connections
The router works with RutOS, which is based on OpenWrt Linux, and it can be managed through a web interface, SSH, SMS and Teltonika RMS remote management. For VPN connections there are OpenVPN, IPsec with up to five tunnels, WireGuard, ZeroTier, L2TP, PPTP, GRE and SSTP. In the web interface you can set up a firewall, a VLAN, i.e. dividing the network into logical parts, a web filter and a data limit for the SIM card.
Power and mounting
The router gets power through a 4-pin industrial connector in the range of 9-50 V DC or through passive PoE from the LAN1 port, that is, power over an Ethernet cable. The power consumption is under 4 W in standby and under 18 W at maximum. The housing can be fastened to a DIN rail from two sides or placed on a flat surface.
Included
- 5G and 4G router Teltonika RUTX50, 1 pcs
- 18 W power supply
- 4 swivel mobile antennas, SMA
- 2 Wi-Fi antennas with magnetic bases, RP-SMA, with a 1.5 m cable
- Adhesive GNSS antenna, SMA, with a 3 m cable
- Ethernet cable, 1.5 m
- SIM adapter set
- Quick start guide



Reviews
There are no reviews yet.