Description
Wireless bridge for linking distant network points by radio
The 2.4 GHz wireless bridge TP-Link CPE210 works to 802.11b/g/n, where 802.11n is the same as Wi-Fi 4, and delivers data rates up to 300 Mbit/s. The built-in antenna has a gain of 9 dBi and the maximum outdoor range is 5 km.
IPX5 housing and power over the network cable
The white housing is rated IPX5, protected against water jets from any direction, and works from −30 to 70 °C at 10–90% relative humidity. The unit has one RJ45 port that also carries power: PoE, power over the Ethernet cable. Maximum power consumption is 10.5 W.
Radio settings and operating modes
The unit can be used as an access point, client, repeater or bridge, and in router modes. In the radio settings you choose 802.11b, 802.11g, 802.11n or a mixed mode, a channel width of 5, 10, 20 or 20/40 MHz, and enter the distance between the units up to 200 km. MAXtream, based on TDMA (time division multiple access), sends data streams in strict order and reduces latency in networks with many clients; in this mode Pharos series devices connect to the access point. Security covers WPA2-PSK encryption and MAC address filtering.
Use with Pharos Control
A single unit is set up in its web interface, several units at once in TP-Link’s Pharos Control software.
- Install Pharos Control on a Windows or Linux computer and start the server.
- Open the management interface in a web browser and log in with the username and password set during installation.
- Add the units by automatic discovery in the same subnet or by IP range; the unit’s default username and password are admin.
- Upgrade firmware, reboot units and set scheduled tasks or e-mail alerts on status changes.
In the box
- TP-Link CPE210 wireless bridge
- Mounting kit
- Power cable




Reviews
There are no reviews yet.