Description
Smart switch module turns a regular switch into a Z-Wave scene button
The Shelly Wave i4 LR smart switch module, installed behind existing switches, reads presses from four switches or buttons and uses them to control other Z-Wave network devices, such as a light, blinds or a socket outlet. Instead of relays, the module has four digital inputs, so your current switches stay on the wall.


Multi-Click: several actions with one button
With the Multi-Click function, up to four actions can be assigned to each of the four inputs, up to 16 in total. For example, one press turns the lights on and a double press closes the blind.

Communication on Z-Wave Plus or Long Range network
The module has a Z-Wave 800 series S800 processor. In Long Range mode, the module communicates directly with a hub that supports ZWLR at 864 MHz, and the range reaches 1000 metres in the open, 80 metres indoors. In a Z-Wave Plus mesh network, where mains-powered devices relay the signal, the frequency is 868.4 MHz, the indoor range is up to 40 m, and the module also works as a repeater.

Adding with SmartStart and firmware updates
To add the module to the network, it is enough to scan the module’s QR code with SmartStart. Communication uses the S2 Authenticated security mode and AES-128 encryption. New firmware can be installed over the air (OTA), without removing the module from the wall.
Installation in a wall box with a neutral wire
The module requires a neutral wire and fits behind the switch in a wall box measuring 37 × 42 × 16 mm. The live wire connects to terminal L, the neutral wire to terminal N, and the switches or buttons to inputs SW1–SW4. Use solid single-core wires, or stranded wires with ferrules, with a cross-section of 0.5–1.5 mm², and connect one wire to each terminal. The module must be installed by a qualified electrician.

Included in the package
- Shelly Wave i4 LR smart switch module, 1 pc
- User and safety manual


Reviews
There are no reviews yet.