Description
Tyre inflator for cars, bicycles and balls
According to the manufacturer, the twin-cylinder Etenwolf S3 cordless tyre inflator from the Zephyr series raises a 26.3-inch SUV tyre from 30 to 35 psi in about one minute. On a full battery the pump runs continuously for about 25 minutes at 20–50 psi and 25 °C.

Four modes and automatic stop
The MODE button selects car, bicycle, ball or manual mode, and the UNIT button switches between psi, kPa and bar. The + and − buttons set the target pressure. The display shows target and actual pressure together; at the target pressure the pump stops and remembers the last setting.
| Mode | Pressure range | Default |
|---|---|---|
| Car | 8–130 psi | 35 psi |
| Bicycle | 10–145 psi | 22 psi |
| Ball | 3–16 psi | 8.5 psi |
| Manual | up to 11 bar (160 PSI) | 30 psi |

Hose and valve adapters
The high-pressure hose is 0.9 m long. The Presta valve adapter, inflation needle and tapered nozzle are stored on the back panel, so the nozzle for bicycles, balls and inflatables always travels with the pump.
Battery, charging and power bank
The battery charges through the USB-C port in about 3.5 hours with a 5 V 3 A (15 W) charger and in about 6 hours with a 10 W charger. The USB-A port supplies 5 V 2 A to charge a phone or camera on the go.

LED light and cooling
The 300 lm LED work light on the front has four modes, including an SOS signal for emergencies. The cooling system lets the pump inflate all four tyres in a row without a break.

Use
- Switch the pump on by holding the START/PAUSE button for 2 seconds.
- Screw the hose connector clockwise onto the valve and select a mode with the MODE button.
- Set the required target pressure with + and − and press START/PAUSE again to inflate.
Cleaning and care
Use the pump in a dry, clean place and do not wash it with water. In longer storage, charge the battery every three months and keep the pump at –10 °C to 60 °C.
In the box
- Tyre inflator Etenwolf S3, 1 pc
- High-pressure hose, 1 pc
- Air chuck, 1 pc
- Presta valve adapter, 1 pc
- Inflation needle, 1 pc
- Tapered nozzle, 1 pc
- USB-A to USB-C cable, 1 pc
- User manual, 1 pc
Charger not included.

Reviews
There are no reviews yet.