Description
Cordless tyre inflator with two hoses and preset pressure
The Etenwolf S6 SE cordless tyre inflator from the Vortex series is a twin-cylinder pump for car, motorcycle and bicycle tyres and balls. According to the manufacturer, one full charge raises the pressure of up to 18 pickup tyres (245/70 R17) from 30 to 35 psi.

Two hoses for tyres and inflatables
For tyres and balls there is a high-pressure hose that takes the tapered nozzle, the ball needle and the Presta valve adapter. The high-volume hose inflates air mattresses, inflatable pillows and pools, and in deflation mode it pumps the air out of them.

Modes and automatic stop
The MODE button selects six inflation modes and a deflation mode, and the UNIT button switches between psi, kPa and bar. You set the target pressure with the rotary knob, and the display shows target and actual pressure together. The pump stops by itself at the target pressure and remembers the last pressure and unit.
| Mode | Pressure range | Default |
|---|---|---|
| Car | 8–50 psi | 35 psi |
| Pickup | 10–85 psi | 35 psi |
| Motorhome | 20–130 psi | 60 psi |
| Bicycle | 10–145 psi | 22 psi |
| Ball | 3–16 psi | 8.5 psi |
| Manual | 0–160 psi | 30 psi |

Battery, charging and power bank
The battery stores 57.7 Wh and charges with a 30 W USB PD charger in about 2–3 hours. The same USB-C port works as a power bank output of up to 30 W for a phone, tablet or laptop.

LED light and cooling
The LED light on the side of the handle gives 300 lm or 1000 lm and also has slow strobe and an SOS signal. Active cooling limits overheating of the components during longer use.

Use
- Switch the pump on by holding the START/PAUSE button for 1 second.
- Connect the high-pressure hose to the valve and select a mode with the MODE button.
- Turn the knob to the required target pressure and press START/PAUSE again to inflate.
Cleaning and care
Use the pump in a dry, clean place and do not wash it with water. In longer storage, charge the battery every three months and keep the pump at –20 °C to 60 °C.
In the box
- Tyre inflator Etenwolf S6 SE, 1 pc
- High-pressure hose, 1 pc
- High-volume hose, 1 pc
- Air chuck, 1 pc
- Ball needle, 1 pc
- Presta valve adapter, 1 pc
- Tapered nozzle for inflatables, 1 pc
- USB-C cable, 1 pc
- User manual, 1 pc


Reviews
There are no reviews yet.