Description
Undermount stainless steel sink BLANCO SUPRA 500-U
The undermount stainless steel sink BLANCO SUPRA 500-U is fixed from below into the worktop cut-out, so the sink rim sits under the worktop. The surface has a brushed finish, and the sink measures 530 × 430 mm with a height of 184 mm. It has one bowl with corners rounded to a 60 mm radius.
Installation under the worktop
The sink suits a dense, water-resistant worktop such as natural stone, composite or glass; wood and wood-based boards are not suitable. The cut-out is 500 × 400 mm with a tolerance of +2/−1 mm and a corner radius of 60 mm.
Screw fixing needs a worktop at least 18 mm thick. On a thinner worktop of at least 10 mm, the sink is fixed with the separately sold set 244 755, whose pins are glued to the worktop with epoxy. The tap goes into the worktop: the hole is 35 mm in diameter and is drilled 60 mm from the cut-out edge. The bonding surfaces are cleaned with isopropanol before sealing, and after sealing with silicone the sink needs 24 hours before use. According to the side view drawing, the drain outlet sits 283 mm below the top of the worktop.
Bowl, drain and overflow
The bowl has a 3½″ basket strainer that you open and close by hand. The supplied waste and overflow kit joins the bowl’s drain and overflow into one pipe. Its space-saving pipe leads the drain towards the back of the cabinet and leaves more room under the sink. BLANCO recommends this pipe when a pull-out waste sorter goes under the sink.
Stainless steel and surface finish
The sink is made of 18/10 stainless steel containing 18% chromium and 10% nickel. With oxygen, the chromium forms a thin, invisible protective layer that renews itself. The first fine scratches on a new sink are normal and become less visible as the layer renews.
The brushed finish is one of BLANCO’s three classic stainless steel finishes and the most chosen of them. A hot pot or long sunlight does not change the colour of the surface. Reddish dots on the surface are rust carried over from other rusty objects or water pipes, and they wipe off.
Stainless steel sink care
For daily cleaning, put washing-up liquid on the soft side of a sponge and wipe in the brushing direction, without circular movements. Then rinse the sink and dry it with a microfibre cloth, such as BLANCO cloth 126999. For limescale, use vinegar essence diluted 1:10 with water or BLANCO DailyClean+.
Once a month, deep clean with BLANCO DeepClean Stainless Steel 526306: apply a hazelnut-sized amount with a sponge and polish in the brushing direction. To clean the basket strainer, put a level teaspoon of dishwasher powder on the closed strainer, pour about 250 ml of boiling water over it, let it work, brush it clean and rinse. Do not use abrasive cleaners, hypochlorite bleach, silver cleaning baths, cleaners with chlorine or hydrochloric acid, scratchy sponges or steel wool.
In the box
- Waste and overflow kit with space-saving pipe
- 3½″ basket strainer, opened by hand
- Fixing kit
Needed separately
One trap is needed to connect the sink to the drain. Kitchen sink trap BLANCO 137267 connects the waste kit to a Ø40 or Ø50 mm drain pipe and has a dishwasher connection. With a waste sorter under the sink, the flat trap BLANCO 137287 with a Ø50 mm outlet and two appliance connections fits instead. The kitchen tap is also bought separately.






Reviews
There are no reviews yet.