Description
Inset stainless steel sink BLANCO LEMIS XL 6 S-IF Compact
Inset stainless steel sink BLANCO LEMIS XL 6 S-IF Compact has an IF flat rim, so it can be installed on top of the worktop or flush with it. Installed from above, the rim rests on the worktop; flush-mounted, the rim sits level with the worktop. The surface is brushed, the outer size is 780 × 500 mm and the height 214 mm. The sink is reversible, so the bowl can go on the left or the right. The tap position is on the back rim of the sink.
Installing in the worktop
For installation from above, a cut-out of 760 × 480 mm is made, with a tolerance of +2/−1 mm and a corner radius of 15 mm. Installed this way, the IF flat-rim stainless sink suits any worktop, laminate included. The rim is sealed to the worktop with silicone and the sink is fixed with clamps for worktops 28–34 mm and 34–40 mm thick.
For flush mounting, a rebate of 782 × 502 mm, 1.5–2 mm deep with a corner radius of 26 mm, is milled round the cut-out, leaving a 1 mm gap between the sink and the worktop. This installation suits water-repellent worktops only, such as granite, glass, artificial stone or mineral materials, and BLANCO recommends having it done by a specialist. As the sink is reversible, the tap hole on the back rim is made by the installer. The side-view drawing shows the waste pipe 332 mm below the worktop surface. A dishwasher connects via the separately sold trap.
Bowl and drain
The extra-large bowl has an inside corner radius of 60 mm. The drain is opened and closed by hand with the 3½″ basket strainer. The space-saving pipe of the waste and overflow kit routes the drain towards the back of the cabinet and leaves room under the sink. BLANCO recommends this pipe when a pull-out waste sorter goes under the sink.
Stainless steel and surface finish
The sink is made of 18/10 stainless steel, containing 18% chromium and 10% nickel. With oxygen, the chromium forms a thin invisible protective layer that renews itself. The first fine scratches on a new sink are normal and become less visible as the layer renews.
The surface has a brushed finish. Reddish spots on the surface are rust carried over from other rusty objects or water pipes and wipe off.
Caring for a stainless steel sink
For daily cleaning, put washing-up liquid on the soft side of a sponge and wipe along the brushing direction, not in circles. Then rinse the sink and dry it with a soft cloth so that water drops leave no marks. To remove limescale, use vinegar essence diluted 1:10 or a descaler.
To clean the basket strainer, put one level teaspoon of dishwasher powder on the closed strainer and pour about 250 ml of boiling water over it. Let it work, brush the strainer and the drain, take out the strainer insert, clean the holes and rinse with clean water. Use gentle products only: abrasive cleaners, cleaners containing chlorine or hydrochloric acid, bleach, steel wool, scrapers and the scouring side of a sponge scratch or damage the surface.
In the box
- Kitchen sink BLANCO LEMIS XL 6 S-IF Compact, 1 pc
- Waste and overflow kit with space-saving pipe
- 3½″ basket strainer, opened by hand
- Fixing clamps
Needed separately
One trap is needed to connect the sink to the drain. Kitchen sink trap BLANCO 137267 connects the waste kit to a Ø40 or Ø50 mm drain pipe and has a dishwasher connection. With a waste sorter in the sink cabinet, the flat kitchen sink trap BLANCO 137287 fits instead, with a Ø50 mm outlet and two appliance connections. The kitchen tap is also bought separately.






Reviews
There are no reviews yet.