Description
Robotic lawn mower that also cuts the lawn edges
The LiDAR-navigated robotic lawn mower GOAT O1200 LiDAR PRO maps the garden with a rotating 360° LiDAR sensor and a 3D ToF LiDAR sensor and, according to the manufacturer, moves with 2 cm precision even in the dark. You can set the cutting height in the app in 0.5 cm steps and separately for each zone. In gentle mode it mows about 120 m² and in efficient mode about 180 m² per hour.
Edge trimmer and obstacle avoidance
The TruEdge trimmer on the side of the mower cuts the lawn edges with trimmer line after each zone is mown, and stops when the system detects a person nearby. According to the manufacturer, the AI camera and 3D ToF LiDAR recognise more than 200 types of obstacle, hedgehogs included, and the mower passes them at a distance of 5 cm. The mower passes through passages at least 0.8 m wide and crosses edges up to 3 cm high. The rain sensor stops mowing when it rains, and the mower resumes by itself after the rain delay.
In the ECOVACS HOME app you can create a schedule, split the map into zones, set no-go zones and an animal protection period, which by default pauses work from 19:00 to 7:00. Outside the map the mower locks and unlocks only with the PIN code.
Installation and mapping
The charging station goes on a level, open area with a strong Wi-Fi signal, where the grass around the station is cut to 6 cm. The power supply is mounted at least 30 cm above the ground, and the station is fixed to the ground with the supplied pegs and hex key only after setup. Before the first start, fit the trimmer brush, set a PIN code, pair the mower with the app over Bluetooth and 2.4 GHz Wi-Fi, and remove the LiDAR sensor cover. The mower creates the map automatically or follows the boundary under your control from the app while you stay within 6 m of it.
Cleaning and maintenance
Wipe the LiDAR sensor once a week and clean the AI camera and ToF sensor every 1 to 2 weeks. Replace the blades about every 4 to 6 weeks, and the trimmer line and trimmer brush every 4 to 8 weeks. Clean the blade disc and wheels with a brush and the other parts with a clean dry cloth, and fit the LiDAR sensor cover before turning the mower over. For winter, charge the mower fully, switch it off and store it in a cool dry place, charging it every 6 months.
In the box
- Ecovacs GOAT O1200 LiDAR PRO robotic lawn mower with 3 blades and 3 screws fitted
- TruEdge trimmer module and trimmer line
- Two-piece trimmer brush
- LiDAR sensor cover
- Charging station with 10 m power cable
- 3 A power supply
- 6 charging station pegs and hex key
- Spare blades: 9 blades and 9 screws
- Quick start guide and instruction manual






Reviews
There are no reviews yet.