Description
Corded window cleaning robot washes glass wet or dry with four spray nozzles
The corded window cleaning robot HUTT A1 holds onto the glass with 6000 Pa of suction and runs on mains power. If the power fails, the built-in backup battery keeps the robot on the window for at least 20 minutes and the unit sounds an alarm. The spray system wets the glass from a 150 ml tank, and the base carries 13 precision sensors.
Window robot with three cleaning paths
The robot cleans the glass along a Z-shaped path, an N-shaped path or a path along the edge, and returns to its starting point automatically when wiping is finished. For windows with a narrow frame the manufacturer recommends the N-shaped path. In wet mode the robot adjusts the spray angle and frequency to the size of the glass and pauses spraying at edges and corners. For dry cleaning you switch the water spray off on the remote.
The remote controls the robot and the spray
With the remote you move the robot up, down, left and right, switch the water spray on or off, change the cleaning path, pause and resume, restart cleaning or start fixed-point cleaning. If the robot ends up out of reach after cleaning, you steer it closer with the remote.
Setting up and use
Attach a dry cleaning pad to the base, white side down, leaving the detection holes in the corners uncovered. Fill the tank with clean or distilled water or glass cleaning fluid, connect the power cord to the adapter and plug, and tie the safety rope to a fixed object, wrapping it around 1–2 times. Turn on the switch on the base, hold the start button for at least 1 second, place the robot on the glass and press the power button. The robot suits windows of at least 40 × 60 cm with a frame at least 6 mm wide and works at 0–40 °C.
Cleaning and care
Soak the cleaning pad for 2 minutes in water at about 20 °C, clean it with a soft brush without rubbing or wringing, and let it dry naturally. Wipe the suction opening and the roller with a dry cloth. To clean the tracks, turn the robot base up and hold the power button: the wheels turn slowly so you can wipe them clean with a damp paper towel. After wet cleaning, empty the tank and keep the robot in a dry, cool, ventilated place for 1–2 days.
In the box
- Window cleaning robot HUTT A1, 1 pc
- remote control
- power adapter and power cord with plug
- safety rope
- cleaning pads
- water bottle
- spray nozzle
- storage bag
- user manual











Reviews
There are no reviews yet.