Description
Window cleaning robot with a battery OMNI station and three-nozzle spraying
With a holding force of at least 800 N, the window cleaning robot ECOVACS WINBOT W2S PRO OMNI wipes flat windows, mirrors, shower doors, balcony glazing and tiled walls. It works on glass from 30 × 40 cm and its noise level is 66 dB.
Spraying, edge detection and cleaning path
The three-nozzle sprayer moistens the glass with solution from the 120 ml tank, enough for over 75 m² in Fast mode. TruEdge 2.0 edge detection lifts the pad at the edges and lowers it back onto the glass. WIN-SLAM 4.0 plans the cleaning path and the robot returns to its starting point when done.
Cleaning modes and app
The station’s mode button selects Thorough, Deep, Fast and Edge cleaning. The ECOVACS HOME app adds Spot, Heavy-Duty and Zone cleaning as well as 360° remote control and manual spraying. Voice prompts tell you when to remove the robot from the glass.
Battery station and automatic cable rewind
The station’s 5200 mAh battery powers the robot even when the socket is far away and recharges in about 3 hours at room temperature. In Zone mode the robot cleans a window up to 8 m wide and 2.5 m high within reach of its 5.5 m cable. After use the station rewinds the cable at the press of a button and the robot hangs in the station’s storage box.
Safety rope and fall protection
The safety rope is factory-fitted to the station and 12-stage fall protection monitors how the robot holds to the glass. In a power cut the robot stays on the glass for another 30 minutes. The station holds to smooth floors with a suction cup and has a 5 kg counterweight.
Using the robot
Lock the station’s carabiner to a fixed object such as a table leg or stair handrail and place the station on a smooth floor near the window. Pour ECOVACS WINBOT cleaning solution into the tank, wet and wring out the pad and attach it to the hook-and-loop base of the robot. Switch on the station, hold the robot’s START button for 2 seconds and place the robot on the glass at least 10 cm from the edge.
Cleaning and care
Wash the pad in tap water and wring it out as dry as possible before use; replace a worn pad. After cleaning, empty the tank and wipe the fan and the four spherical sensors with a dry cloth. The robot’s brushes are removable and washable: they release when you press both bumpers at once.
In the box
- Window cleaning robot ECOVACS WINBOT W2S PRO OMNI, 1 pc
- OMNI station, 1 pc
- Safety rope, 1 pc (fitted to the station)
- Power cable, 1 pc
- Microfibre cleaning pad, 2 pcs
- ECOVACS WINBOT cleaning solution, 230 ml
- User manual, 1 pc











Reviews
There are no reviews yet.