Description
Window cleaning robot wipes glass on its own and sprays water automatically
The corded window cleaning robot HUTT W9 holds onto the glass with 3800 Pa of suction and runs on mains power. If the power fails, the backup battery holds the robot on the glass for at least 20 minutes and the unit sounds an alarm. The water tank holds 150 ml and the robot has 13 detection sensors.
Two cleaning paths and spraying that adapts to the glass
The robot wipes the glass along a Z-shaped or N-shaped path and returns to its starting point by itself when finished. For windows with a narrow frame the manufacturer recommends the N-shaped path. In wet mode the robot adjusts the spray angle and frequency to the size of the glass and pauses spraying at edges and corners. For dry wiping you switch the water spray off on the remote.
You steer the window robot with the remote control
With the remote buttons you move the robot in four directions, switch the water spray on or off, choose the Z or N path, pause and resume, restart wiping or start fixed-point wiping. If the robot is out of reach after cleaning, you steer it closer with the remote.
Setting up and use
Attach a dry cleaning pad to the base, white side down, straight and leaving the detection holes in the four corners uncovered. Fill the water bottle with clean or distilled water or glass cleaning fluid and pour it into the tank. Connect the robot’s power cord to the adapter, the cord with the plug to the adapter, and the plug to the wall socket. Tie the safety rope to a solid, fixed object and wrap it around 1–2 times. Turn on the switch on the base, hold the start button for over 1 second and, once the robot is attached to the glass, let go and press the power button. The robot cleans windows of at least 40 × 60 cm with a frame at least 6 mm wide, at 0–40 °C.
Cleaning and care
Soak the cleaning pad for 2 minutes in water at about 20 °C, clean it with a soft brush without rubbing or wringing and let it dry. Wipe the suction inlet and the dust scraper with a dry cloth. Dirty tracks have a wheel cleaning function: turn the robot base up, hold the power button and wipe the slowly turning wheels with a damp wipe. After use, empty the tank, and after wet cleaning leave the robot in a dry, cool, ventilated place for 1–2 days.
In the box
- Window cleaning robot HUTT W9, 1 pc
- remote control
- power adapter
- power cord with plug
- safety rope
- cleaning pads, 4 pcs
- spray nozzles, 4 pcs
- water bottle
- user manual










Reviews
There are no reviews yet.