Description
Window cleaning robot with a station that also works without a socket
The corded and cordless window cleaning robot ECOVACS WINBOT W2S OMNI is powered from its station, whose built-in lithium battery supplies the robot even where there is no socket. At the window edge the TruEdge scrubber lowers, turns at 200 rpm and retracts after cleaning, and in Quad-Edge edge cleaning the robot reaches within 1.1 cm of the edge.
Station power, cable and storage
When plugged in, the station’s internal adapter powers the robot and charges the station battery at the same time; without mains power the robot runs on the station battery. The robot and station are joined by a 5.5 m composite cable that combines the power lead and safety rope, and the station winds the cable back at the press of a button. The station buttons switch the power, pause and resume, select the mode and send the robot back to its starting point; after cleaning the robot hangs on a hook in the station’s storage compartment. The station battery charges fully in about 3 hours at room temperature.
Spraying and cleaning modes
Three wide-angle nozzles spray the cleaning solution automatically, and remote control in the app also allows manual spraying. According to the manufacturer, the tank of about 80 ml covers up to 55 m² of glass. The app has 7 cleaning modes, and the station’s mode button switches between deep, thorough, fast and edge cleaning, also during operation. WIN-SLAM 4.0 plans the cleaning path, and the drive treads run on a synchronous belt.
Control with the ECOVACS HOME app
The robot connects to the phone over Bluetooth, and in the app you move it with 360° remote control. The app switches between indoor and outdoor window views and starts spot cleaning.
Safety rope and fall protection
Before cleaning, lock the carabiner of the factory-fitted safety rope to a fixed object such as a table leg, bed leg or curtain rod. The safety rope is made of three-layer composite material with a tensile strength of up to 100 kg, and a suction cup holds the 5.2 kg station to the floor with over 800 N. Even at low charge the robot stays on the glass for over 30 minutes; a gravity acceleration sensor keeps it stable and optocoupler sensors detect an edge in 0.2 seconds.
Use
Place the station next to the window on a flat, smooth floor, lock the carabiner, pour ECOVACS WINBOT cleaning solution into the tank and attach the moistened and wrung-out cleaning pad under the robot with the hook-and-loop strip. Hold the station’s power button for at least 2 seconds to switch on the station and the robot. When the fan starts, place the robot pad-side on the glass: it attaches itself, cleans and returns to its starting point at the end. A single window can be up to 8 m wide and 2.5 m high, the glass at least 3 mm thick, and on frameless glass you attach the robot at least 10 cm from the edge.
Cleaning and maintenance
You wash the cleaning pad in tap water, wring it dry and let it dry fully before storage. Wipe the fan, side rollers and round sensors with a clean dry cloth. The scrubber cleans itself when you place the robot on the pad and press both bumpers at the same time.
In the box
- Window cleaning robot ECOVACS WINBOT W2S OMNI, 1 pc
- Station, 1 pc
- Safety rope with carabiner
- AC power cord
- Cleaning pad, 2 pcs
- ECOVACS WINBOT cleaning solution
- User manual










Reviews
There are no reviews yet.