Description
Window cleaning robot with TruEdge scrubber for window edges and corners
The corded window cleaning robot ECOVACS WINBOT W2S detects the window edges and lowers its TruEdge scrubber near the edge; it turns at up to 200 rpm and retracts after cleaning. In Quad-Edge edge cleaning the robot reaches within 1.1 cm of the window edge.
Spraying and cleaning modes
Three wide-angle nozzles spray the cleaning solution automatically, and remote control in the app also allows manual spraying. According to the manufacturer, the tank of about 80 ml covers up to 55 m² of glass. The app has 7 cleaning modes: thorough, deep, fast, edge, zone, spot and heavy-duty cleaning. WIN-SLAM 4.0 plans the cleaning path, and the drive treads run on a synchronous belt.
Control with the ECOVACS HOME app
The robot connects to the phone over Bluetooth, and in the app you move it with 360° remote control. The Return to Corner function sends the robot to the marked corner, and the app switches between indoor and outdoor window views.
Safety rope and safety battery
The composite cable has a factory-fitted safety rope with a carabiner, which you tie to a fixed object such as a curtain rod or table leg before cleaning. During operation the robot charges its safety battery, which powers it when it is unplugged or the power fails; even at low charge the robot stays on the window for over 30 minutes. A gravity acceleration sensor keeps the robot stable and optocoupler sensors detect an edge in 0.2 seconds.
Use
Wet the cleaning pad, wring it as dry as possible and attach it under the robot with the hook-and-loop strip so that the wide and narrow sides line up. Pour ECOVACS WINBOT cleaning solution into the tank, tie the safety rope, connect the power and hold the START button for 2 seconds. When the fan starts, place the robot pad-side on the glass: it attaches itself and starts cleaning, then returns to its starting point and beeps. The glass must be at least 3 mm thick, a mirror at least 4 mm, and on frameless glass you attach the robot at least 10 cm from the edge.
Cleaning and maintenance
You wash the cleaning pad in tap water and wring it dry before use; after cleaning, empty any remaining solution from the tank. Wipe the fan, side rollers and round sensors with a clean dry cloth. The scrubber cleans itself when you place the robot on the pad and press both bumpers at the same time.
In the box
- Window cleaning robot ECOVACS WINBOT W2S, 1 pc
- Composite cable with safety rope and carabiner
- Power adapter
- ECOVACS WINBOT cleaning solution
- Cleaning pad
- User manual






Reviews
There are no reviews yet.