Description
Kitchen mixer tap with pull-out spray BLANCO MILA-S
The kitchen mixer tap with pull-out spray BLANCO MILA-S is a single-lever tap with a slim body, a straight-lined L-shaped spout and the lever on the right side of the body. The colour is black matt. A high-pressure (HD) tap suits a kitchen where cold and hot water come under pressure from the wall pipes; an open boiler under the sink needs a low-pressure (ND) tap.
Spout, spray and flow
The spout reach is 208 mm and the total height 296 mm. The maximum flow at 3 bar is 9.9 l/min and the spray gives one aerated jet. Pull the spray out of the spout to fill tall pots and vases. The pull-out part is plastic and the spray hose nylon-sheathed. The hose weight pulls the spray securely back into the spout after use.
Installation and water pressure
The tap fits a 35 mm tap hole in a mounting surface up to 53.5 mm thick. The flexible connection hoses are 500 mm long with a ⅜″ nut. In a stainless steel sink, the supplied stabilising plate holds the tap more firmly. A seal must sit between the tap and the mounting surface.
The operating pressure is up to 10 bar and the water temperature up to 70 °C. A low-pressure tap has three connection hoses, so a low-pressure tap at an open boiler is replaced with another low-pressure tap. Flush the angle valves before connecting. After connecting, unscrew the spray head with a 22 mm spanner, let the water run for at least 20 seconds, refit the spray head and check that the connections do not leak.
Finish and sink colour
The body is brass, and BLANCO chose the black matt finish so that the tap can be matched precisely with the other details of the kitchen.
Tap care
Clean the tap with the soft side of a sponge and dry it with a microfibre cloth. Chlorine cleaners and the scouring side of a sponge damage the surface. Limescale comes off with a vinegar or citric acid solution or BLANCO DailyClean+ descaler (526305): spray it on, leave it for a moment, wipe with a damp cloth and dry.
If the aerator is hard with limescale, unscrew it anticlockwise and soak it overnight in vinegar water or citric acid. BLANCO states that spare parts for its taps are available for at least 10 years.
In the box
- Flexible connection hoses, 500 mm, with ⅜″ nut
- Weight that pulls the spray hose back
- Stabilising plate for installation in a stainless steel sink
- Non-return valve (EN 1717)
Needed separately
The connection hoses attach to cold and hot water angle valves with a ⅜″ thread, which are needed separately.




Reviews
There are no reviews yet.