Description
Kitchen mixer tap with pull-out spray BLANCO JANDORA-S
The kitchen mixer tap with pull-out spray BLANCO JANDORA-S is a single-lever tap in brushed stainless steel. As a high-pressure tap (HD) it suits kitchens where both the cold and the hot water pipes come out of the wall. The lever sits on the right of the tap and has a vertical neutral position, which gives more freedom when the tap is fitted in front of a wall. To save energy, the lever’s basic setting is on cold water.
Spout, spray and flow rate
The tap is 364 mm high overall and the spout reaches 201 mm. The spray is concealed in the end of the spout and pulls out on its nylon-sheathed hose to direct water to any part of the sink. Under the sink a weight on the hose pulls the spray back after use, and a guide pin at the back seats the spray correctly in the spout. At 3 bar the flow rate is 9.9 l/min. The spray’s aerator adds air to the jet and, according to BLANCO, is built to reduce limescale build-up.
Installation and water pressure
The hole in the sink or worktop must be 35 mm in diameter and the mounting surface may be up to 50 mm thick. When fitting the tap to a stainless steel sink, place the supplied stabilising plate under it. The tap works at a mains pressure of up to 10 bar and with hot water up to 70 °C and has a non-return valve to EN 1717. An open boiler under the sink needs a low-pressure tap (ND) with three connection hoses, and only another low-pressure tap can replace a low-pressure tap.
Fix the tap from below with PH2 screws, connect the spray hose with 17 and 11 mm spanners and screw the weight onto the hose. Flush the angle valves into a bucket and connect the connection hoses to the angle valves with a 19 mm spanner without twisting them. The spray hose and its weight must hang freely in the cabinet. Then remove the aerator, let the water run for at least 20 seconds, check the connections for leaks and screw the aerator back on.
Solid stainless steel and brushed surface
The body and spout are made of solid stainless steel, and the brushed finish is the steel’s own surface. The tap weighs 1.83 kg.
Tap care
After use, wipe the tap dry with a microfibre cloth; the BLANCO microfibre cloth 126999 can be washed in a washing machine at up to 90 °C. To remove limescale, use a mild vinegar or citric acid solution or BLANCO DailyClean+ (526305): spray it on, leave it for a moment, wipe with a damp cloth and dry. Chlorine cleaners and the scouring side of a sponge damage the surface, so use a soft cloth.
If the aerator is hard with limescale, unscrew it anticlockwise and soak it overnight in vinegar water or citric acid. BLANCO states that spare parts for its taps are available for at least 10 years.
In the box
- Weight that pulls the spray hose back
- Flexible connection hoses, 700 mm, with ⅜″ nut
- Stabilising plate for fitting the tap to a stainless steel sink






Reviews
There are no reviews yet.