Description
Kitchen mixer tap with two-mode pull-out spray BLANCO CATRIS-S Flexo
The kitchen mixer tap with two-mode pull-out spray BLANCO CATRIS-S Flexo is a semi-professional single-lever tap in matt black. As a high-pressure tap (HD) it suits kitchens where both the cold and the hot water pipes come out of the wall. The lever sits on the right of the tap.
Spray, jets and flow rate
The tap is 475 mm high overall and, according to BLANCO, its low height suits kitchen wall units well. The spout reaches 187 mm. A button on the spray switches between an aerated stream and a stronger rinse spray. The black silicone hose and the spray can be taken out of the holder and directed to any part of the sink; when put back, a magnet holds the spray in place. At 3 bar the flow rate is 7.9 l/min. According to BLANCO, the spray’s aerator is built to reduce limescale build-up.
Installation and water pressure
The hole in the sink or worktop must be 35 mm in diameter and the mounting surface may be up to 56 mm thick. When fitting the tap to a stainless steel sink, place the supplied stabilising plate under it. The tap needs a mains pressure of at least 1 bar, works at up to 10 bar and with hot water up to 70 °C. The supplied backflow preventer complies with EN 1717 and keeps water from flowing back from the tap into the mains. An open boiler under the sink needs a low-pressure tap (ND) with three connection hoses, and only another low-pressure tap can replace a low-pressure tap.
Before connecting the hoses, flush the angle valves into a bucket. Fix the tap from below with the hand-tightened nut and connect the hoses to the angle valves with a 19 mm spanner without twisting them. Then remove the spray’s aerator, let the water run for at least 20 seconds, check the connections for leaks and refit the aerator.
Matt black finish and brass body
The body is made of brass, and the flexible silicone spray hose has the same colour. The tap weighs 2.3 kg.
Tap care
After use, wipe the tap dry with a microfibre cloth; the BLANCO microfibre cloth 126999 suits all surfaces. To remove limescale, spray BLANCO DailyClean+ (526305) on the surface, leave it for a moment, wipe with a damp cloth and dry, but test it on a hidden spot first. Chlorine cleaners and the scouring side of a sponge damage the matt surface, so use a soft cloth.
If the aerator is hard with limescale, unscrew it anticlockwise and soak it overnight in vinegar water or citric acid. For old water pipes BLANCO recommends a dirt filter between the angle valve and the connection hose. BLANCO states that spare parts for its taps are available for at least 10 years.
In the box
- Flexible connection hoses, 700 mm, with ⅜″ nut
- Stabilising plate for fitting the tap to a stainless steel sink
- Backflow preventer (EN 1717)




Reviews
There are no reviews yet.