Description
Kitchen mixer tap with two-mode pull-out spray BLANCO ALTA-S II
The kitchen mixer tap with two-mode pull-out spray BLANCO ALTA-S II is a single-lever tap whose stainless steel body has a dark steel (satin dark steel) finish. The lever sits on top and sets both the flow and the temperature. A high-pressure (HD) tap suits a kitchen where both the cold and the hot water pipes come out of the wall; an open, unvented boiler under the sink needs a low-pressure (ND) tap.
Spout, spray and flow rate
The tap is 226 mm high overall and the spout reaches 190 mm. The maximum flow rate is 7.9 l/min at 3 bar. The metal pull-out spray switches between two jets, and a weight pulls the nylon-sheathed hose back into the body. The built-in non-return valve prevents backflow into the water supply to EN 1717.
Installation and water pressure
The tap fits a 35 mm tap hole in the sink or worktop and is fixed from below with the BLANCOLock fixing, hand-tightened to at most 10 Nm. BLANCO’s drawing allows a mounting surface up to 50 mm thick. In a stainless steel sink the stabilising plate gives the tap a firmer footing. The tap is rated for water pressure up to 10 bar and water up to 70 °C.
Connecting the spray and the hoses
The spray hose connects under the sink with 17 and 14 mm spanners and the weight clips onto the hose by hand. The flexible connection hoses are 700 mm long with a ⅜″ nut and connect to the angle valves with a 19 mm spanner after the pipes have been flushed. Then unscrew the aerator with a 22 mm spanner, run the water for at least 20 seconds and refit the aerator. Replacing a low-pressure tap needs a high-pressure connection, because high- and low-pressure taps have a different number of hoses.
Finish and matching sink
Dark steel is a PVD finish on the stainless steel body. BLANCO states that this colour goes especially well with Durinox Dark Steel sinks.
Tap care
Dry the tap with a microfibre cloth after use. Remove limescale with a vinegar or citric acid based cleaner and then rinse with clean water. Do not clean the tap with chlorine cleaners or the scouring side of a sponge. If the spray starts to splash, unscrew the aerator anticlockwise and soak it overnight in vinegar water or citric acid solution.
Dirt filter and spare parts
In houses with old pipes BLANCO recommends a dirt filter between the angle valve and the tap hose. BLANCO states that spare parts are available for at least 10 years.
In the box
- Kitchen mixer tap BLANCO ALTA-S II, 1 pc
- Hose weight for pulling the spray hose back
- Flexible connection hoses, 700 mm, with ⅜″ nut
- Stabilising plate for installation in stainless steel sinks




Reviews
There are no reviews yet.