Description
Ceiling-mount wireless access point for Wi-Fi 7 networks
The AP3600 is a dual-band Wi-Fi 7 wireless access point (IEEE 802.11be) that also supports 802.11ax, ac, n and g devices. Data rates reach up to 2882 Mbit/s on the 5 GHz band and up to 688 Mbit/s on the 2.4 GHz band. Multi-Link Operation (MLO) lets a Wi-Fi 7 client use several bands at once. Four internal 5.5 dBi antennas and MU-MIMO serve several clients at the same time.
Ports and power
The device takes network and power through its 2.5 Gbit/s PoE IN port; it can be powered by a PoE switch, a PoE adapter (IEEE 802.3at/af or passive PoE) or a DC adapter. The second, 1 Gbit/s PoE OUT port is disabled by default: it powers a further PoE device when the access point is powered by an 802.3at source and PoE passthrough is enabled in the management interface. Maximum power consumption is 10 W.
Use and setup
To set it up without a controller, connect the access point to a modem or router, join the Wi-Fi network printed on the label and open cudyap.net or 192.168.10.254 in a browser. Create a login password there and follow the Quick Setup steps. When connecting to a Cudy controller or Cudy Mesh device, wait for the system LED to turn blue: the device is then online, and its Wi-Fi name and password match the main device. To restore factory settings, hold the RESET button for 2–3 seconds.
Network features
The device supports up to 8 SSIDs, guest access, VLANs, QoS and IGMP snooping, with WPA3, WPA2 and WPA security. The access point mounts on a ceiling or wall and operates at 0–40 °C.
In the box
- Cudy AP3600 wireless access point
- mounting base
- metal backing ring
- quick installation guide
A PoE adapter is not included.






Reviews
There are no reviews yet.