Description
The industrial Ethernet router Teltonika RUT140 connects a machine, controller or other end device to the network and isolates it from the rest of the network with NAT. It has two 10/100 Mbit/s Ethernet ports and Wi-Fi 4. The WAN port connects to the existing network and the LAN port to the end device.
Wi-Fi router with industrial protocol support
Running RutOS firmware, the router supports the industrial protocols Modbus, DLMS, DNP3 and OPC UA, used by automation controllers, meters and industrial equipment. With Teltonika RMS the router can be managed and devices reached remotely, and RMS VPN services can be used.
Industrial power connector and DIN rail mounting
Power connects through a 3-pin industrial connector at 9–30 V DC. A grounding screw sits next to the connector. For cabinet installation the housing has an integrated DIN rail bracket.
Use
The router’s default IP address is 192.168.1.1. The front panel has a reset button, Power, LAN and WAN LEDs and a Wi-Fi antenna connector. The LEDs show the power, LAN and WAN connection status. The router is made in Lithuania.








Reviews
There are no reviews yet.