Description
Industrial Wi-Fi router with gigabit Ethernet ports
This industrial Wi-Fi router with gigabit ports combines a wired network, Wi-Fi and Bluetooth LE in one device. The port panel of the Teltonika RUTX10 has 4 gigabit Ethernet ports (10/100/1000 Mbit/s): three LAN ports and one WAN port. Up to 128 port-based or tag-based VLANs let you split the network into separate segments.
Dual-band Wi-Fi and Bluetooth LE
The dual-band Wave 2 802.11ac Wi-Fi reaches up to 867 Mbit/s. The opposite side carries three antenna connectors, two for Wi-Fi and one for Bluetooth, and one USB port.
VPN, routing and remote management
The router supports the VPN protocols OpenVPN and IPsec, as well as PPTP, L2TP and DMVPN. Besides static routing, the dynamic protocols BGP, OSPF v2 and RIP v1/v2 are available as options. Traffic can be prioritised by source and destination address, service, protocol or port, with WMM (802.11e) for Wi-Fi traffic. The device can be accessed and managed remotely through the RMS remote management system.
Use and software
The router runs RutOS, an OpenWrt-based operating system with upgradeable firmware. The web interface opens at the default address 192.168.1.1, and the factory username and password are printed on the router’s label. Firewall rules come pre-configured in the web interface. Power is connected through a 4-pin plug, with an input voltage of 9–50 V.






Reviews
There are no reviews yet.