Brand
FABER: Built-in cooker hoods
- Home appliances for sale
- 14-day right of return
- K-Link wireless connection
Why choose FABER?
FABER is a kitchen ventilation brand whose strength is that its extraction is made invisible, yet effective. While for many people the choice is between design and suction, FABER approaches the subject as a complete kitchen solution: the hood can be hidden in a cabinet or the extraction can be integrated into the hob, so the worktop and the furniture front remain calm.
From a buyer's point of view, this brand has two major advantages. Firstly, it focuses on capturing steam and odours right at the point where they arise, including with Perimeter Aspiration solutions that help make the air capture more efficient. Secondly, FABER supports ease of use with automation, for example the K-Link connection, which in a suitable combination allows the hood to be set to work logically according to the hob. Compared with other 2in1 directions, FABER is also strong in the interaction between a separate hood and hob and in technologies that reduce condensation.
The FABER selection in our online shop
In the Ruumist Ruumi online shop, the FABER selection is mainly gathered into three practical directions: built-in extractor hoods, 2in1 hobs with extractor, and built-in hobs. This means you can solve both a classic kitchen hood project and the ventilation of a modern kitchen island or open kitchen-living room, choosing either the extraction or the recirculation principle.
Among the built-in extractor hoods, you will often find series such as Inka Lux and In-Light. These are designed to be installed in a kitchen cabinet so that minimal equipment is visible, while the hob area still gets LED lighting and extraction. In the 2in1 world the key word is Galileo, where an induction hob and an extractor work as one solution, avoiding the need to install a separate hood on the wall or ceiling. In the choice of built-in hobs it is worth paying attention to the control logic (for example touch-sensitive slider control) and possible connection solutions designed for convenient joint use with a specific hood.
It is important that in FABER products you will consistently find features that help in everyday life: K-Link simplifies control, Steam Off System – SOS is aimed at reducing condensation, and motor solutions (including energy-saving and quieter variants) support more even operation even when the air duct is not very short. The exact set of features depends on the product, so it is worth comparing on the product page exactly what has the most impact on your kitchen layout.
What to consider when choosing a FABER product?
Start with installation. The FABER range includes built-in, wall-mounted and island-mounted solutions, while for hobs there is both the usual surface installation and flush installation level with the worktop. If you choose a 2in1 hob with extractor, always check whether there is enough space in the lower part of your kitchen units for the air duct or filter module, and which installation method is intended.
Then decide whether you will use extraction or recirculation. Extraction requires an air duct and a connection of a suitable diameter, while recirculation usually requires an activated carbon filter and its regular replacement. In our products you can clearly see the version as stated in the product, and from the filter type line whether the solution uses an activated carbon filter. If there is no possibility to vent the air out of the kitchen, recirculation is practical, but plan the cost and maintenance of the filter.
Finally, compare performance and ease of use. The extractor hoods have a stated minimum and maximum airflow (in our selection typically around 200 to 580 m³/h) and an energy efficiency class (A+ to D). For control, look for what suits you: simple buttons, electronic control or touch-sensitive slider control. If you want the appliance to work as automatically as possible, check the K-Link compatibility on the products and choose the combination intended for it.
Frequently asked
If you can safely and correctly vent the air out of the building, extraction is usually the most direct solution. Recirculation suits cases where an air duct cannot be made, but in that case an activated carbon filter is usually needed and you must consider the filter maintenance and replacement. On the product page, "Hood version" and "Filter type" are the best places to check.
K-Link is a FABER solution where the hob and the hood can communicate with each other and the hood can adjust its suction power automatically. Compatibility depends on the specific model and combination, so before buying check in the product details whether K-Link is available and whether the hob and extractor you are looking for are designed for it.
The choice of airflow depends on the size of the room, whether there is an open kitchen, and how intensively you cook. Our products list the minimum and maximum airflow (based on IEC 61591), so you can compare how much reserve there is for everyday use and for more intensive cooking. If you are unsure, choose a solution with several speed levels and a clear intensive mode.
An activated carbon filter is necessary for recirculation, because it helps bind odours when the air is returned to the room after filtering. If you choose extraction, an activated carbon filter may not be needed. Check the "Filter type" and "Hood version" lines on the product.
If you want the simplest solution, buttons or clear electronic control are suitable. If you value a modern look and quick adjustment, touch control or touch-sensitive slider control is a common choice. If your aim is to intervene manually as little as possible, look at the K-Link options and choose the combination designed for it.
-
109,00 €
- Product type
- Cabinet-integrated hood
- Width
- 52.2 cm
- Airflow
- 390 m³/h
- Noise level
- 62 dB
-
129,00 €
- Product type
- Cabinet-integrated hood
- Width
- 52.2 cm
- Airflow
- 590 m³/h
- Noise level
- 63 dB
-
229,00 €
- Product type
- Cabinet-integrated hood
- Width
- 49.2 cm
- Airflow
- 620 m³/h
- Noise level
- 64 dB
-
619,88 €
- Product type
- Cabinet-integrated hood
- Width
- 49.5 cm
- Airflow
- 710 m³/h
- Noise level
- 64 dB
-
647,90 €
- Product type
- Cabinet-integrated hood
- Width
- 70 cm
- Airflow
- 710 m³/h
- Noise level
- 64 dB
-
156,24 €
- Product type
- Cabinet-integrated hood
- Width
- 49.4 cm
- Airflow
- 590 m³/h
- Noise level
- 63 dB
-
169,00 €
- Product type
- Cabinet-integrated hood
- Width
- 52.2 cm
- Airflow
- 690 m³/h
- Noise level
- 65 dB
-
159,00 €
- Product type
- Cabinet-integrated hood
- Width
- 52.2 cm
- Airflow
- 590 m³/h
- Noise level
- 63 dB
-
279,00 €
- Product type
- Cabinet-integrated hood
- Width
- 56.2 cm
- Airflow
- 570 m³/h
- Noise level
- 65 dB
-
229,00 €
- Product type
- Cabinet-integrated hood
- Width
- 49.2 cm
- Airflow
- 620 m³/h
- Noise level
- 64 dB
-
269,00 €
- Product type
- Cabinet-integrated hood
- Width
- 49.2 cm
- Airflow
- 620 m³/h
- Noise level
- 64 dB
-
274,78 €
- Product type
- Cabinet-integrated hood
- Width
- 70 cm
- Airflow
- 670 m³/h
- Noise level
- 63 dB
-
399,00 €
- Product type
- Cabinet-integrated hood
- Width
- 56.2 cm
- Airflow
- 670 m³/h
- Noise level
- 67 dB
-
429,00 €
- Product type
- Cabinet-integrated hood
- Width
- 56.2 cm
- Airflow
- 670 m³/h
- Noise level
- 67 dB
-
429,00 €
- Product type
- Cabinet-integrated hood
- Width
- 56.2 cm
- Airflow
- 670 m³/h
- Noise level
- 67 dB
-
425,00 €
- Product type
- Cabinet-integrated hood
- Width
- 49.2 cm
- Airflow
- 670 m³/h
- Noise level
- 66 dB
-
435,00 €
- Product type
- Cabinet-integrated hood
- Width
- 49.2 cm
- Airflow
- 670 m³/h
- Noise level
- 66 dB
-
619,88 €
- Product type
- Cabinet-integrated hood
- Width
- 49.5 cm
- Airflow
- 710 m³/h
- Noise level
- 64 dB
-
86,65 €
- Product type
- Cabinet-integrated hood
- Width
- 52.2 cm
- Airflow
- 336 m³/h
- Noise level
- 66 dB
All products shown.