Description
A built-in cooker hood for cleaner air in a small or medium-sized kitchen
FABER Inka Plus HCS BK A52/2 is a built-in kitchen cooker hood that is installed in the upper cabinet above the hob. The unit, about 52 cm wide, fits a standard 60 cm wide cabinet and, thanks to an air flow of up to 590 m3/h, helps reduce cooking smells and grease particles in everyday use.
Main features
- Built-in 52 cm cooker hood for a 60 cm cabinet – designed to be hidden inside the kitchen cabinet, leaving the front of the kitchen visually uniform.
- Powerful air flow 230–590 m3/h – well suited for removing steam and smells in small and medium-sized kitchens.
- B energy efficiency class – annual energy consumption is approximately 56 kWh, which helps keep running costs at a reasonable level.
- LED lighting with A class efficiency – conveniently lights the cooking surface and uses little energy.
- Mechanical push-in push-out buttons – simple and reliable control without complicated extra functions.
- 150 mm exhaust outlet – allows the cooker hood to be connected directly to a ventilation duct or piping with a suitable adapter.
- Maximum noise level of about 63 dB – a balanced ratio between power and noise level in ordinary home use.
- Black stainless finish – the black colour together with the stainless surface matches modern kitchen furniture and appliances.
Compatibility and accessories
The cooker hood is designed to be installed in an upper kitchen cabinet whose front panel is usually 60 cm wide. The width of the unit itself is about 52 cm, so it stays hidden between the sides of the cabinet. The exhaust connection is intended for a pipe with a diameter of 150 mm, so when planning the installation it is worth checking the existing ventilation duct.
According to factory data, the FABER Inka Plus HCS BK A52/2 is designed primarily as an extraction, or duct out, solution, but it can also be used with recirculation if the manufacturer’s carbon filters are added. Suitable carbon filters are, for example, Charcoal filter F8 (112.0157.240), Charcoal filter High Performance FHP8 KIT (112.0158.127) and Charcoal filter Long Lasting FLL8 KIT (112.0185.278). These filters are not included and must be purchased separately if desired.
The cooker hood has metal grease filters, which correspond to grease filtration efficiency class C. The unit has no connection to the hob via radio or Wi Fi and no automatic sensor technologies are included, which makes use straightforward and intuitive.
Installation and use
Correct installation ensures efficient and safe operation of the cooker hood. During installation, the following general principles and the manufacturer’s instructions should be followed:
- Plan the cabinet dimensions – make sure the width of the upper cabinet is 60 cm and the depth is suitable for installing the cooker hood.
- Choose a suitable height in relation to the hob – keep the distance from the cooking surface recommended by the manufacturer to ensure efficient removal of steam and safety.
- Connect the exhaust – use a 150 mm pipe or a suitable adapter to connect the unit to the ventilation duct or to piping leading to an outer wall.
- Install the grease filters and, if necessary, carbon filters – before use, check that the grease filters are installed correctly and that suitable carbon filters are in use in the case of recirculation.
- Test the operating modes and lighting – switch the unit on, select different speeds and check that the LED lighting works.
Maintenance and filtration efficiency
The efficiency of the cooker hood depends to a large extent on the condition of the filters. Metal grease filters should be cleaned regularly to prevent a layer of grease from building up and to maintain air flow. They can usually be removed and washed with warm water and a suitable detergent, and if necessary, according to the manufacturer’s instructions, also in a dishwasher.
If you use the unit with recirculation, the carbon filters must be replaced over time. The frequency depends on the usage load and the chosen filter type. For example, Long Lasting type carbon filters can last longer than ordinary filters, but the exact replacement interval is determined by the manufacturer.
It is also advisable to check the cleanliness of the air ducts and the ventilation duct from time to time, to prevent the build-up of dirt or grease that obstructs air movement. Proper maintenance helps keep the cooker hood reliable and extends its service life.
Why choose FABER Inka Plus HCS BK A52/2?
FABER Inka Plus HCS BK A52/2 is a practical choice if you need a built-in cooker hood hidden inside a cabinet that combines sufficient air flow, energy efficiency and simple use. The black stainless finish suits a modern kitchen well, the LED lighting makes cooking more comfortable and the B energy efficiency class helps keep running costs under control. If you are looking for a less visible solution that lets the front of the kitchen furniture dominate while still providing reliable ventilation, this model is worth considering.


Reviews
There are no reviews yet.