Description
Aquarium external filter for freshwater and saltwater aquariums
The SUNSUN HW-404A filter is an aquarium external filter intended for both freshwater and saltwater aquariums. The filter is installed outside the aquarium, so its body does not take up space inside the aquarium that would otherwise be left for fish and decorations.

Filter baskets and filter media
The housing has four filter baskets, into which you place filter media of your choice in the right order. You can reach the baskets by opening two clips and lifting the filter head off the housing.

Installation and connection
The inlet and outlet valves attach to the filter head, and the holder between them is also a shut-off valve. The hoses are attached to the valves with nuts. The inlet pipe and outlet pipe attach to the edge of the aquarium with a base, the distance of which you can set according to the thickness of the glass. The water spray pipe at the end of the outlet pipe is installed parallel to the aquarium wall and distributes the water evenly in the aquarium. Before starting, press the priming button on the filter head, which fills the filter with water and draws water into the hose. Repeat this until all the pipes are full of water. If air remains in the filter, gently shake the running filter.

Cleaning and maintenance
Take the filter media out of the baskets and rinse it in aquarium water. Clean the inside of the hoses and the inlet and outlet pipes regularly, cleaning the hose connection with a brush. Also clean the housing and the rotor regularly. If the filter runs with an unusual sound, grease all O-rings generously with petroleum jelly.
Included in the package
- External filter: housing, filter head with two clips and four filter baskets
- Inlet and outlet valve with shut-off valve
- Hoses
- Inlet pipe with suction strainer
- Outlet pipe and water spray pipe with end cap
- Hose holder and plastic screws 6 × 40
- Suction cups


Reviews
There are no reviews yet.