Description
Aquarium internal filter with UV-C lamp
The aquarium internal filter with UV lamp, which attaches to the glass with suction cups, combines filtration, water circulation, aeration and UV-C sterilisation in one unit. The total power of the filter is 18 W.

UV-C irradiation and filtration
Water flows through a quartz glass tube, where UV-C radiation with a wavelength of 253.7 nm destroys algae and bacteria in the water. Destroyed and clumped algae stay in the filter wool, while the filter sponge and the bio-ball filter media collect dirt from the water.

Installation
- Place the filter in the aquarium so that it is fully underwater and the depth does not exceed 2 m.
- Fix the filter to the aquarium glass with the suction cups.
- In an aquarium with a sandy bottom, leave the filter sponge on the inlet opening, as sand can break the quartz glass tube.
- Connect the filter to the mains only once it is in the water; the water circulation and UV lamp then start working.
- Adjust the water flow with the slider on the outlet opening and the aeration with the air inlet valve.

Cleaning and maintenance
Before cleaning or replacing the UV lamp, disconnect the filter from the mains. Clean the filter sponge, quartz glass tube and filter wool about once a month: the back cover and filter sponge come out when you press the buttons on the sides of the back cover, and the quartz glass tube is cleaned with a brush. To replace the UV lamp, unscrew the screws and pull out the quartz glass tube. Clean the rotor chamber and rotor with a brush; if necessary, the shaft can be replaced. Wear parts are the UV lamp, filter sponge and rotor.
Included in the package
- Internal filter with UV lamp, quartz glass tube, filter sponge and bio-ball media
- Air inlet valve
- Suction cup holder


Reviews
There are no reviews yet.