Description
UV lamp aquarium external filter
The 9 W UV lamp in the filter head helps reduce the growth of algae and microorganisms that worsen water quality. Fill the filter baskets of the SUNSUN HW-403B aquarium external filter yourself with the filter material of your choice.

UV lamp switch and start-up
The UV lamp switch is located on the side of the filter head, and an indicator light shows when the lamp is on. The filter also has an additional UV lamp switch, which must be in the correct position, otherwise the UV lamp will not work. To fill the filter before starting, press the priming button on the filter head, which draws water from the hose. The holder between the valves secures the inlet and outlet valves and acts as a shut-off valve, while the water spray pipe distributes the water evenly in the aquarium.

Installation and connection
- Open the two clips and lift the filter head off the body.
- Put the filter material into the baskets, place the baskets in the body in the correct order, attach the filter head and close the clips.
- Slide the inlet and outlet valve into the filter head, secure them with the holder, connect the hoses and tighten the nuts.
- Assemble the suction pipe and outlet section, connect the hoses to them and fix both to the edge of the aquarium with screws.
- Press the priming button until all the pipes are filled with water.
The distance of the edge mount can be set according to the thickness of the aquarium glass. The water spray pipe is fixed with suction cups parallel to the aquarium wall.

Cleaning and maintenance
When the filter material becomes clogged, take it out and rinse it with water taken from the aquarium. Regularly clean the insides of the hoses and the inlet and outlet pipes, brush the inside of the hose connections, and apply plenty of petroleum jelly to the O-rings. To replace the UV lamp, remove the filter head from the body, turn it upside down, unscrew the two screws around the quartz tube and remove the quartz tube by gently turning it. Then take out the old lamp, install a new one and reassemble the filter.
What’s included
- Filter body with filter baskets and basket lid
- Filter head with priming button and clips
- UV lamp and quartz tube
- Inlet and outlet valve with shut-off valve
- Hoses
- Suction pipe with elbow, mounting bracket, connecting pipe and intake strainer
- Outlet section with elbow, hose holder and connecting ring
- Water spray pipe with end cap
- Suction cups
- Plastic screws


Reviews
There are no reviews yet.