Description
External aquarium filter with UV lamp and pre-filter
The external aquarium filter with UV lamp cleans the water in four stages, and it can be placed under or beside the aquarium. The maximum lift height is 2.5 m.

Filter baskets and pre-filter
The housing contains four filter baskets for mechanical, biological and chemical filtration. The contents of the baskets can be chosen according to the fish and plants in the aquarium. Ceramic rings and bio balls are a habitat for filter bacteria. The pre-filter protects the deeper layers of filter media from heavier dirt so that they do not clog.

UV lamp action
Water passing through the UV chamber is exposed to ultraviolet radiation, which limits the growth of algae, bacteria and other microorganisms floating in the water. The remaining filter media can then catch biological dirt more easily.

Valves and hose connections
Hoses can be disconnected via the multi-purpose quick-connect valve without draining the whole filter. The hose connections rotate 360°, which makes installation easier even in a tight space. Rubber feet dampen vibration, and the rotor shaft is ceramic.
Installation and connection
Push the inlet and outlet valves into the top of the filter and lock them with the small handle. Open the four clamps on the housing and lift off the top of the filter. Place the filter media in the baskets, and put the UV lamp and quartz tube in their places. Attach the intake and outlet pipes to the edge of the aquarium and tighten the mounting base screws according to the thickness of the aquarium glass. At first start-up, press the start button on the filter and repeat until the filter and hoses are filled with water.

Cleaning and maintenance
Remove clogged filter media from the baskets and rinse them in aquarium water. Regularly clean the inside of the hoses and pipes. If a hose connection is clogged, disconnect it and clean the inside with a brush. Apply enough petroleum jelly to all O-rings. To replace the UV lamp, remove the cover, turn it upside down and rotate the quartz tube until its grooves line up with the lamp connection. Then lift out the quartz tube, remove the old lamp, and fit the new lamp and quartz tube. Also clean the quartz tube periodically.
Included in the package
- External filter with UV lamp, quartz tube and four filter baskets
- Inlet and outlet valves
- Hoses
- Intake pipe elbow, connecting pipes and intake strainer
- Outlet elbow and arched connecting pipe
- Water spray pipe with end cap
- Mounting base with screw
- Suction cups


Reviews
There are no reviews yet.