Description
Aquarium cascade filter for side or back glass
The aquarium cascade filter, suitable for freshwater and saltwater, hangs on the side or back glass of the aquarium, and the filtered water flows back into the aquarium from the outflow pipe. The filter’s power is 6 W and the body is made of ABS and PP plastic.

Multi-stage filtration
The filter body contains filter baskets stacked one above another, whose filter pads remove both larger debris and fine suspended particles from the water. A filter pad with activated carbon and a filter floss are included. For biological filtration, other filter media, such as ceramic rings or zeolite, can be placed in the baskets instead of the filter pads.

Flow adjustment and outflow
The flow rate can be smoothly adjusted with the water flow adjustment knob, and the height of the outflow pipe can be changed. To control the direction and distribution of the water flow, a directional outflow nozzle or a water spray pipe can be fitted to the outflow pipe. To reduce the greasy film on the water surface, the inflow pipe can be used with a surface skimmer.

Installation
- Release the two latches and lift the filter lid up.
- Fill the filter with aquarium water up to the top edge of the basket.
- Attach the inflow pipe to the IN side of the filter and the outflow pipe to the OUT side, and tighten the nut firmly. For a taller aquarium, extend the inflow pipe with the extension pipe.
- Attach two aquarium brackets to the side of the filter and support the filter on the glass holder under the body, which reduces filter vibration.
- Hang the filter on the aquarium and position the brackets according to the glass.
- Turn the water flow adjustment knob fully open, then connect the filter to the mains.

Cleaning and maintenance
Before maintenance, remove the filter plug from the socket. Clean the filter baskets and filter pads regularly, and fill the filter with water before restarting it. If the flow weakens, clean or replace dirty filter media and remove any blockage from the filter screen. In case of noise, remove the rotor cover and clean the rotor chamber of foreign objects.
Included
- Filter body with filter baskets and filter pads
- Filter lid and basket lid
- U-shaped inflow pipe with inflow cover
- Extension pipe
- U-shaped outflow pipe
- Outflow nozzle
- Water spray pipe
- Aquarium brackets


Reviews
There are no reviews yet.