Description
Aquarium internal filter with UV lamp and air supply
Aquarium internal filter with UV lamp filters water mechanically, keeps the water moving, irradiates it with UV-C light and aerates it. The filter works fully underwater and attaches to the aquarium glass with suction cups. The maximum lift height is 0.7 m.

UV-C irradiation
The UV lamp emits UV-C light with a wavelength of 253.7 nm. The irradiation limits the growth of algae, bacteria and other microorganisms that worsen the water quality.

Filter sponge, aeration and water flow
The filter sponge on the water intake holds back sand and dirt that could damage the quartz tube. The bio-ball basket holds additional filter material. Through the air valve, the filter aerates the water, which keeps enough oxygen in the water. The direction of the outlet opening can be changed.

Installation
Fix the filter to the aquarium glass with the suction cups so that it is fully underwater, but not deeper than 2 m. Connect the power only once the filter has been placed in the water. The filter and the UV lamp then start working.
Cleaning and maintenance
Clean the filter sponge on the water intake once a month and replace the UV lamp after 8000 operating hours. To remove the back cover, press the buttons on both of its sides and clean the cover with the sponge. Take out the filter housing and clean the quartz tube with a brush. To replace the UV lamp, unscrew the screws with a screwdriver and take out the quartz tube. Remove the air valve, press both sides of the top cover and lift the cover off. Then take the filter material out of the bio-ball basket and clean it. Take out the rotor chamber and rotor and clean them with a brush; if necessary, the shaft can be replaced.
Included in the set
- Internal filter with UV lamp and quartz tube
- Filter sponge
- Bio-ball basket with filter material
- Air valve
- Suction cups


Reviews
There are no reviews yet.