Description
Aquarium external filter with three filter baskets
An aquarium external filter suitable for freshwater and saltwater aquariums directs the water through three filter baskets in the housing. The baskets can be filled with the selected filter media for mechanical, biological or chemical filtration. The filter has a power of 35 W and a maximum lift height of 2 m.

Priming button and shut-off valve
Before starting, fill the filter and hoses with water using the blue priming button on the filter head: press the button repeatedly until all the tubes are filled with water. The handle between the inlet and outlet valves secures the valves to the filter head and also acts as a shut-off valve, with which the hoses can be closed for maintenance.

Installation
Release the clamps, lift the filter head off the housing and place the filter baskets with the filter media into the housing in the correct order. Then put the head back and close the clamps. Connect the hoses to the inlet and outlet valves and secure them with compression nuts. Attach the inlet and outlet set to the edge of the aquarium, set the mounting base according to the glass thickness, and install the spray bar parallel to the aquarium wall.
Cleaning and maintenance
Always remove the plug from the socket before opening the filter cover. If the flow rate decreases, rinse the filter media in aquarium water and clean the inside of the hoses and tubes with a brush. If the filter makes unusual noises during operation, grease all O-rings generously with petroleum jelly.
Included in the package
- External filter (housing, filter head with priming button, clamps)
- Filter baskets (3 pcs) and basket mesh cover
- Inlet and outlet valve block with shut-off valve
- Hoses
- Inlet elbow, elbow holder, connecting tubes and inlet strainer
- Outlet elbow, connecting flange and outlet nozzle
- Spray bar with end cap
- Suction cups, hose holder and plastic screw


Reviews
There are no reviews yet.