Description
Kitchen mixer tap with pull-out spray BLANCO LINUS-S
Kitchen mixer tap with pull-out spray BLANCO LINUS-S is a single-lever tap with the lever on the right of the body. The colour is satin platinum. The metal spray head pulls out of the spout, so you can direct water to every part of the sink. The high spout fills pots and vases too.
Spout, spray and flow
The spout reach is 221 mm and the total height of the tap 287 mm. The maximum flow at 3 bar is 10 l/min, and the aerator gives an aerated jet. The spray hose is metal-sheathed and the pull-out is metal.
A weight on the hose pulls the spray back into the spout. A non-return valve (EN 1717) keeps used water from flowing back into the mains.
Installation and water pressure
The tap fits a 35 mm hole in the sink or worktop, with a mounting surface up to 50 mm thick. The base diameter is 45 mm. The flexible connection hoses are 700 mm long with a ⅜″ nut. In a stainless steel sink the stabilising plate gives the tap firm support.
A high-pressure (HD) tap connects to pressurised cold and hot water pipes, for example central hot water or a pressurised water heater. The tap takes a water pressure of up to 10 bar and a water temperature of up to 70 °C. A low-pressure tap has three hoses, so the high-pressure tap goes only onto a high-pressure connection.
Installation needs pliers and 13, 19, 21 and 22 mm spanners. The tap is fixed from below with a 21 mm spanner, the weight slides onto the spray hose, and the hose connects with 13 and 19 mm spanners. Before fitting the connection hoses, let water run from the angle valves into a bucket to flush dirt out of the pipes. Finally remove the aerator with a 22 mm spanner, let the water run for at least 20 seconds, check the connections for leaks and refit the aerator.
Finish and sink colour
The tap body is brass with a satin platinum PVD finish, a thin metal layer applied in a vacuum. BLANCO pairs satin platinum taps with composite and ceramic sinks, so the satin platinum tap matches a BLANCO SILGRANIT or ceramic sink.
Tap care
After use, dry the tap with a microfibre cloth. For limescale use a vinegar or citric acid solution: let it act briefly, then rinse it off. If limescale builds up in the aerator, unscrew it anticlockwise and soak it overnight in vinegar water or citric acid solution.
Clean with the soft side of a sponge and a chlorine-free cleaner. BLANCO states that spare parts for the tap are available for at least 10 years.
In the box
- Kitchen mixer tap BLANCO LINUS-S, 1 pc
- Flexible connection hoses, 700 mm, with ⅜″ nut
- Hose weight that pulls the spray hose back
- Stabilising plate for installation in a stainless steel sink
Needed separately
With old water pipes a separate dirt filter is needed, which catches dirt from the pipes before the tap. BLANCO recommends fitting it between the angle valve and the tap hose, with two filters in series for high pressure.




Reviews
There are no reviews yet.