Description
Kitchen mixer tap with two-mode pull-out spray BLANCO AMBIS-S
Kitchen mixer tap with pull-out spray BLANCO AMBIS-S is a single-lever tap with the lever on top of the body. The spout is set high on the body, leaving more room for hands and dishes above the sink. The colour is brushed stainless steel. A high-pressure (HD) tap suits homes where cold and hot water pipes come out of the kitchen wall.
Spout, spray and flow rate
The tap is 231 mm high overall and the spout reach is 233 mm. The flow rate at 3 bar is 7.8 l/min. A push button switches from aerated jet to spray. The spray pulls out of the spout on a metal pull-out and its hose is nylon-sheathed.
A weight fitted under the sink pulls the spray hose back into the spout after use. With the supplied non-return valve the tap is protected against backflow to EN 1717.
Installing the sink mixer and water pressure
The tap fits a 35 mm hole in the sink or worktop and is secured from below with a clamp plate and screws, mounting surface up to 50 mm thick. The flexible connection hoses are 700 mm long with a ⅜″ nut. When fitting the tap into a stainless steel sink, use the stabilising plate to support the mounting.
The tap works at mains pressure up to 10 bar and hot water up to 70 °C. An open boiler installed under the sink needs a low-pressure (ND) tap with three hoses. Only a low-pressure tap can replace a low-pressure tap, because the number of hoses differs.
The spray hose is connected under the tap with 14 mm and 16 mm spanners and the weight is fixed to the hose with a PZ 2 screwdriver. Flush the supply pipes before connecting the hoses and tighten them onto the angle valves with a 19 mm spanner. Before first use, unscrew the aerator from the spray head with a 17 mm spanner, run the water for 20 seconds, check the joints for leaks and refit the aerator.
Finish and material
The tap is made of solid stainless steel. The steel surface is brushed.
Tap care
After use, dry the tap with a microfibre cloth. To remove limescale, spray a descaler onto the surface, leave it for a moment, wipe with a damp cloth and dry. Use the soft side of a sponge and keep chlorine cleaners and the scouring side of a sponge away from the tap.
If the jet starts to spray unevenly, unscrew the aerator from the spray head anticlockwise and soak it overnight in vinegar water or citric acid. With old water pipes, BLANCO recommends fitting a dirt filter between the angle valve and the connection hose. BLANCO states that spare parts for its taps are available for at least 10 years.
In the box
- Kitchen mixer tap BLANCO AMBIS-S, 1 pc
- Weight that pulls the spray hose back
- Flexible connection hoses, 700 mm, with ⅜″ nut
- Stabilising plate for fitting the tap into a stainless steel sink
- Non-return valve (EN 1717)
Needed separately
To connect the tap to the water supply you need hot and cold angle valves under the sink to which the ⅜″ hose nuts connect.





Reviews
There are no reviews yet.