Description
Kitchen mixer tap with curved spout BLANCO MIDA
The kitchen mixer tap with curved spout BLANCO MIDA is a single-lever tap with a slim body, a gently rounded C-shaped spout and the lever on the right side of the body. The colour is volcano grey. A high-pressure (HD) tap suits a kitchen where cold and hot water come under pressure from the wall pipes; an open boiler under the sink needs a low-pressure (ND) tap.
Spout and flow
The spout reach is 182 mm and the total height 327 mm. The maximum flow at 3 bar is 13.9 l/min and the water leaves the spout as an aerated jet. Tall pots and vases fit under the high spout, and the full-circle swivel spout reaches every part of the sink.
Installation and water pressure
The tap fits a 35 mm tap hole in a mounting surface up to 60 mm thick. The flexible connection hoses are 500 mm long with a ⅜″ nut. In a stainless steel sink, the supplied stabilising plate holds the tap more firmly. A seal must sit between the tap and the mounting surface.
The operating pressure is up to 10 bar and the water temperature up to 70 °C. A low-pressure tap has three connection hoses, so a low-pressure tap at an open boiler is replaced with another low-pressure tap. Flush the angle valves before connecting. After connecting, unscrew the aerator with a 19 mm spanner, let the water run for at least 20 seconds, refit the aerator and check that the connections do not leak.
Finish and sink colour
The body is brass with a SILGRANIT-look finish. BLANCO makes its SILGRANIT-look taps in the same colours as its SILGRANIT sinks, so a volcano grey tap matches a BLANCO sink in the same colour.
Tap care
Clean the tap with the soft side of a sponge and dry it with a microfibre cloth. Chlorine cleaners and the scouring side of a sponge damage the surface. Limescale comes off with a vinegar or citric acid solution or BLANCO DailyClean+ descaler (526305): spray it on, leave it for a moment, wipe with a damp cloth and dry.
If the aerator is hard with limescale, unscrew it anticlockwise and soak it overnight in vinegar water or citric acid. BLANCO states that spare parts for its taps are available for at least 10 years.
In the box
- Flexible connection hoses, 500 mm, with ⅜″ nut
- Stabilising plate for installation in a stainless steel sink
Needed separately
The connection hoses attach to cold and hot water angle valves with a ⅜″ thread, which are needed separately.




Reviews
There are no reviews yet.