Description
The Shelly 1PM Gen3 smart controller set of 2 pcs helps reduce energy use and make switches and plugs smart
If you want to quickly automate existing switches and sockets, the Shelly 1PM Gen3 set of two devices is a practical solution. The compact smart relay adds energy monitoring and remote control without a separate central device. Connecting via Wi‑Fi/Bluetooth allows the devices to be managed from the app, to switch loads safely and monitor consumption in rooms where it brings the greatest savings.
Main features
- A 16 A relay and energy use measurement allow fan heaters, hot water boilers and plug loads to be controlled and consumption to be seen in real time, to find savings.
- Works without a HUB directly in a 2.4 GHz Wi‑Fi network and can be controlled from the Shelly Smart Control app, which makes commissioning quick.
- With a wide supply range of 110-240 V alternating current or 24-30 V direct current, it suits both home and small office solutions.
- The compact size of 37 × 42 × 16 mm fits into a flush box behind a switch or a plug, to preserve the existing furnishings.
- A Wi‑Fi range extender and Bluetooth‑gateway help improve the connection and add BLE devices through the Shelly network.
- Automation tools: schedules, scenes, scripts, webhooks and MQTT allow precise rules to be created and other systems to be interfaced.
- Wide compatibility: Alexa, Google Home and SmartThings support and KNXnet/IP make the device fit also professional projects.
- Built-in protections: a voltmeter, an ammeter and internal temperature monitoring help avoid overload and faults.
Shelly 1PM Gen3 Wi‑Fi/Bluetooth set of two devices
The Shelly 1PM Gen3 is a smart relay that combines switching and energy consumption measurement in one compact housing. It integrates with an existing electrical system and allows flexible automations to be designed without expensive central devices. The set contains 2 pcs, to cover several circuits at once at home or in the office.
Smart control within reach
The device allows you to remotely control light, plugs and other consumers regardless of where you are. Upgrade standard electrical boxes, sockets and switches without a complicated rebuild and manage everything from the app or with voice control.
Developed technology and high performance
The new ESP‑Shelly‑C38F processor and 8 MB of memory ensure smooth operation and a quick response. Durable terminals and safety mechanisms extend the service life. The Wi‑Fi range extender and the built-in Bluetooth‑gateway keep the connection stable throughout the home.
Compatibility and easy integration
No additional hub is needed, because the device works without a separate HUB directly in a Wi‑Fi network. Compatibility with the Shelly app, Alexa and Google Home and SmartThings makes control convenient. Support for the KNXnet/IP protocol also suits more complex projects.
Versatile automation
Automate lighting, underfloor heating control and the operating modes of older devices. Create schedules and scenes and link with other Shelly devices. With the optional Shelly Plus Add‑on module and a DS18B20 sensor, for example the temperature of boiler water can be measured.
Even easier everyday use
By installing the relay behind a plug or a switch, you can make devices work according to schedules and usage patterns. If you wish, switch a heater on from the app before you get home or disable consumers for the night. Energy consumption monitoring helps identify the biggest use and reduce it.
Security and reliability
The device uses modern encryption and supports various security protocols to keep data protected. The compact housing and strong terminals ensure secure installation and stable operation over a long time.
Compatibility, protocols and system planning
The Shelly 1PM Gen3 works without a HUB directly with the Shelly Smart Control app and connects to the home network over 2.4 GHz Wi‑Fi. The initial setup is short and typically takes up to about 10 minutes depending on the network and the environment.
Compatibility includes Amazon Alexa, Google Home and SmartThings, and there are MQTT, KNXnet/IP, scripts and webhooks for more complex automations. Voice control through smart speakers allows simple routines to be created without opening a phone.
The operating conditions are in the range of operating temperature −20 to 40 °C and humidity 30 to 70 percent relative humidity. The maximum recommended installation height is up to 2000 m above sea level.
Installation and usage instructions
Mains-powered devices may be connected only by a competent person. Switch off the power, connect the power and the load according to the diagram and use wires of a suitable cross-section of 0.2-2.5 mm². Strip 6-7 mm of insulation and tighten the terminals to 0.4 Nm. Install the module in a flush box behind a switch or a plug and make sure there is air space around the housing. Do not exceed a 16 A load in alternating current and take into account the starting current of inductive loads.
For the first pairing, use Bluetooth to add the device to the app and then transfer it to the Wi‑Fi network. Name the circuits, set up schedules, notification thresholds and power limits. If necessary, add MQTT or webhooks for integrations and update the firmware before commissioning.
Included in the set
- 2 × Shelly 1PM Gen3 smart relay
- Quick guide and safety information
Automate smartly and cost-consciously
With this set you can quickly get the smart control of two circuits and energy consumption measurement working. A connection that works without a HUB and wide compatibility with platforms simplify setup, and Wi‑Fi/Bluetooth ensures flexible use also in the future. Choose the Shelly 1PM Gen3 if you need a reliable way to switch, monitor and optimise everyday energy use.

Reviews
There are no reviews yet.